B25C7 Dodge Code - Driver Door Ajar Switch 2 Circuit Low
Quick Answer
The Diagnostic Trouble Code (DTC) sets when the Powertrain Control Module (PCM) detects a fault with the Secondary Driver Door Ajar Switch signal received over the CAN C BUS from the Body Control Module (BCM). Common causes include Faulty Driver Door Ajar Switch 2, Driver Door Ajar Switch 2 harness is open or shorted, Driver Door Ajar Switch 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B25C7 Dodge indicates Driver Door Ajar Switch 2 Circuit Low.
- Common causes
- Common causes include Faulty Driver Door Ajar Switch 2, Driver Door Ajar Switch 2 harness is open or shorted, Driver Door Ajar Switch 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B25C7 Dodge Description
What are the Possible Causes of the DTC B25C7 Dodge?
- Faulty Driver Door Ajar Switch 2
- Driver Door Ajar Switch 2 harness is open or shorted
- Driver Door Ajar Switch 2 circuit poor electrical connection
- Faulty Left Front Door Latch Assembly
- Faulty Body Control Module (BCM)
How to Fix the DTC B25C7 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B25C7 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B25C7 Dodge code?
Need more information on how to fix the B25C7 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B25C7 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B25C7 Dodge Code
1. What does the OBDII code B25C7 mean on a Dodge vehicle?
The B25C7 code indicates a problem with the Driver Door Ajar Switch 2 Circuit, specifically that the circuit is showing a low voltage condition.
2. What are the common symptoms of the B25C7 code?
Symptoms may include the door ajar warning light staying on, interior lights remaining illuminated, or issues with door locking and unlocking systems.
3. What causes the B25C7 code to appear?
Common causes include a faulty door ajar switch, damaged wiring or connectors in the circuit, or a failure in the Body Control Module (BCM).
4. Can a faulty door ajar switch cause battery drain?
Yes, a faulty door ajar switch can cause the interior lights or other systems to stay on, leading to battery drain.
5. How do I diagnose the B25C7 code?
Start by visually inspecting the door ajar switch and wiring for damage. Use a multimeter to check for proper voltage levels in the circuit and scan for additional codes.
6. Can I drive with the B25C7 code active?
While the vehicle may still be drivable, it is not recommended as the issue could affect the door locking mechanism or other safety features.
7. How do I fix the B25C7 code?
Repairs may include replacing the door ajar switch, repairing damaged wiring, or reprogramming or replacing the BCM if necessary.
8. How much does it cost to fix a B25C7 code?
The repair cost can range from $50 to $300, depending on whether the issue is with the switch, wiring, or BCM.
9. Can the B25C7 code trigger other warning lights?
Yes, it may trigger other warnings related to the door, such as security system faults or interior light malfunctions.
10. Do I need professional help to fix the B25C7 code?
If you have experience with electrical diagnostics and repairs, you may be able to fix it yourself. Otherwise, seeking professional assistance is recommended.
Discuss the causes and fixes for B25C7 Dodge OBDII Code
Code B25C7 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
