AutoCodes – Generic – B23BE

B23BE Code - Stop/Start Disable Switch 1 Circuit High

Quick Answer

The Powertrain Control Module (PCM) monitors the Stop/Start Disable Switch 1 Circuit. Common causes include Faulty Switch Bank Module, Switch Bank Module harness is open or shorted, Switch Bank Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B23BE indicates Stop/Start Disable Switch 1 Circuit High.
Common causes: Common causes include Faulty Switch Bank Module, Switch Bank Module harness is open or shorted, Switch Bank Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 996

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 04, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B23BE Description

The Powertrain Control Module (PCM) monitors the Stop/Start Disable Switch 1 Circuit. The Diagnostic Trouble Code (DTC) sets when the PCM receives a message over the CAN BUS from the Body Control Module (BCM) that the Stop/Start Disable Switch circuit voltage is greater than 4.995 volts.

OBDII Code B23BE - Stop/Start Disable Switch 1 Circuit High - AutoCodes.com — B23BE Code - Stop/Start Disable Switch 1 Circuit High

What does this mean?

What are the Possible Causes of the DTC B23BE?

Faulty Switch Bank Module
Switch Bank Module harness is open or shorted
Switch Bank Module circuit poor electrical connection
Faulty Body Control Module (BCM)

How to Fix the DTC B23BE?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B23BE code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B23BE code?

Need more information on how to fix the B23BE code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B23BE code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B23BE Chrysler — Stop/Start Disable Switch 1 Circuit High
B23BE Dodge — Stop/Start Disable Switch 1 Circuit High
B23BE Jeep — Stop/Start Disable Switch 1 Circuit High
B23BE RAM — Stop/Start Disable Switch 1 Circuit High

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B23BE Code

1. What are the common symptoms of OBDII code B23BE - Stop/Start Disable Switch 1 Circuit High?

The common symptoms include the stop/start system not functioning properly, the stop/start disable switch not responding, and the check engine light illuminating.

2. What can cause the OBDII code B23BE to be triggered?

This code is typically triggered by a malfunction in the circuit related to the stop/start disable switch 1, such as a high voltage reading.

3. How serious is the OBDII code B23BE - Stop/Start Disable Switch 1 Circuit High?

While this code may not affect the drivability of the vehicle, it is important to address it promptly to ensure the proper functioning of the stop/start system.

4. How can I diagnose the issue causing OBDII code B23BE?

Diagnosing this code usually involves inspecting the wiring and connections related to the stop/start disable switch 1, checking for any damaged components or loose connections.

5. Can I still drive my vehicle with the OBDII code B23BE present?

You can still drive your vehicle with this code, but it is recommended to have it inspected and repaired by a qualified technician to prevent any potential issues with the stop/start system.

6. Are there any DIY repair tips for fixing OBDII code B23BE?

If you have experience with automotive electrical systems, you can try checking the wiring and connections yourself. However, for a more accurate diagnosis and repair, it is best to consult a professional.

7. How much does it typically cost to repair OBDII code B23BE?

The cost of repairing this code can vary depending on the underlying cause. It is advisable to get a diagnosis from a mechanic to determine the exact repair cost.

8. Can OBDII code B23BE be cleared/reset without fixing the issue?

While you can clear the code with an OBDII scanner, it is not recommended to do so without addressing the underlying problem, as it may lead to further issues down the line.

9. Is OBDII code B23BE specific to certain vehicle makes and models?

This code can be specific to certain vehicle makes and models that are equipped with a stop/start system and a disable switch. It is essential to consult the vehicle's manual for more information.

10. How long does it typically take to repair OBDII code B23BE?

The repair time can vary depending on the exact cause of the issue. It may take anywhere from a few hours to a full day to diagnose and repair the problem related to this code.