AutoCodes – RAM – B23BE RAM

B23BE RAM Code - Stop/Start Disable Switch 1 Circuit High

Quick Answer

The Powertrain Control Module (PCM) monitors the Stop/Start Disable Switch 1 Circuit. Common causes include Faulty Switch Bank Module, Switch Bank Module harness is open or shorted, Switch Bank Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B23BE RAM indicates Stop/Start Disable Switch 1 Circuit High.
Common causes: Common causes include Faulty Switch Bank Module, Switch Bank Module harness is open or shorted, Switch Bank Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 642

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 04, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B23BE RAM Description

The Powertrain Control Module (PCM) monitors the Stop/Start Disable Switch 1 Circuit. The Diagnostic Trouble Code (DTC) sets when the PCM receives a message over the CAN BUS from the Body Control Module (BCM) that the Stop/Start Disable Switch circuit voltage is greater than 4.995 volts.

OBDII Code B23BE RAM - Stop/Start Disable Switch 1 Circuit High - AutoCodes.com — B23BE RAM Code - Stop/Start Disable Switch 1 Circuit High

What does this mean?

What are the Possible Causes of the DTC B23BE RAM?

Faulty Switch Bank Module
Switch Bank Module harness is open or shorted
Switch Bank Module circuit poor electrical connection
Faulty Body Control Module (BCM)

How to Fix the DTC B23BE RAM?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B23BE RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B23BE RAM code?

Need more information on how to fix the B23BE RAM code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B23BE RAM code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B23BE RAM Code

What does the OBDII code B23BE RAM indicate?

The code B23BE RAM indicates a problem with the Stop/Start Disable Switch 1 Circuit, specifically that the circuit is reading a high voltage condition.

What are common symptoms associated with the B23BE code?

Common symptoms may include the Stop/Start feature not functioning properly, warning lights on the dashboard, or the engine not shutting off during idling when it should.

What might cause the B23BE code to trigger?

The code can be triggered by a faulty Stop/Start Disable switch, damaged wiring or connectors in the circuit, or issues with the vehicle's body control module.

How can I diagnose the B23BE code?

To diagnose the code, use an OBDII scanner to confirm the code, then inspect the Stop/Start Disable switch, check for wiring issues, and test the circuit for proper voltage readings.

What repairs are recommended for a B23BE code?

Repairs may include replacing the Stop/Start Disable switch, repairing any damaged wiring or connectors, or reprogramming the body control module if necessary.

Can driving with the B23BE code affect my vehicle's performance?

While it may not significantly affect performance, it can prevent the Stop/Start system from functioning, which could lead to decreased fuel efficiency in stop-and-go traffic.

Is it safe to ignore the B23BE code?

Ignoring the B23BE code is not recommended, as it can lead to further electrical issues and prevent the Stop/Start feature from working, impacting fuel economy.

How can I prevent the B23BE code from reappearing after repairs?

To prevent the code from reappearing, ensure that all connections are secure, the replacement parts are of good quality, and the vehicle's electrical system is functioning properly.

Will clearing the code fix the problem?

Clearing the code may temporarily turn off the warning light, but it will not fix the underlying issue. Proper diagnosis and repair are necessary to resolve the problem.