AutoCodes – Generic – B220F

B220F Code - Occupant Restraint Controller Control Driver 1

Quick Answer

When powered, the Occupant Restraint Controller (ORC) performs an internal self test. Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B220F indicates Occupant Restraint Controller Control Driver 1.
Common causes: Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 827

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 10, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B220F Description

When powered, the Occupant Restraint Controller (ORC) performs an internal self test. The repair of this fault condition does not involve any external circuitry and centers on verifying the integrity of the module's internal circuitry and software validity. When Monitored the ORC module on board diagnostics continuously performs internal circuit tests. This Diagnostic Trouble Code (DTC) will set if the module identifies an out of range internal circuit.

OBDII Code B220F - Occupant Restraint Controller Control Driver 1 - AutoCodes.com — B220F Code - Occupant Restraint Controller Control Driver 1

What does this mean?

What are the Possible Causes of the DTC B220F?

Faulty Occupant Restraint Controller (ORC)
Occupant Restraint Controller (ORC) harness is open or shorted
Occupant Restraint Controller (ORC) circuit poor electrical connection

How to Fix the DTC B220F?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B220F code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B220F code?

Need more information on how to fix the B220F code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B220F code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B220F Chrysler — Occupant Restraint Controller Control Driver 1
B220F Dodge — Occupant Restraint Controller Control Driver 1
B220F Jeep — Occupant Restraint Controller Control Driver 1
B220F RAM — Occupant Restraint Controller Control Driver 1

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B220F Code

1. What are common symptoms of OBDII code B220F (Occupant Restraint Controller Control Driver 1)?

- Common symptoms include the airbag warning light staying illuminated on the dashboard, issues with the seatbelt pretensioners, and potential non-deployment of airbags during a collision.

2. What are possible causes of OBDII code B220F?

- Possible causes of this code include a faulty Occupant Restraint Controller (ORC), damaged wiring or connectors in the restraint system, or a defective driver's seatbelt pretensioner.

3. How can I diagnose OBDII code B220F?

- Diagnosis typically involves using a professional OBDII scanner to retrieve the specific fault code, conducting visual inspections of the restraint system components, and performing continuity and resistance tests on the wiring.

4. Can I drive my vehicle with OBDII code B220F present?

- It is not recommended to drive the vehicle with this code present, as it indicates potential issues with the airbag and restraint system, compromising occupant safety in the event of a collision.

5. How can I repair OBDII code B220F?

- Repairing this code often involves replacing the faulty Occupant Restraint Controller (ORC), repairing or replacing damaged wiring or connectors, and addressing any issues with the driver's seatbelt pretensioner.

6. Is it safe to reset the OBDII code B220F without fixing the underlying issue?

- It is not safe to simply reset the code without addressing the underlying problem, as it could result in the airbags not deploying properly in the event of an accident, posing a significant safety risk.

7. Are there any recalls related to OBDII code B220F?

- It's advisable to check with the vehicle manufacturer or the National Highway Traffic Safety Administration (NHTSA) for any recalls related to OBDII code B220F, as some vehicles may have been subject to safety recalls for similar issues.

8. How much does it typically cost to repair OBDII code B220F?

- The cost of repairing OBDII code B220F can vary depending on the specific cause of the issue, but it can range from a few hundred dollars for simple wiring repairs to over a thousand dollars for more complex component replacements.

9. Can OBDII code B220F be triggered by a loose or disconnected battery?

- Yes, a loose or disconnected battery can sometimes trigger OBDII code B220F due to the disruption in power supply to the Occupant Restraint Controller (ORC) or other related components. Reconnecting the battery securely may resolve the issue.

10. How often should I have the airbag and restraint system checked to prevent OBDII code B220F?

- It is recommended to have the airbag and restraint system inspected during routine maintenance or whenever you notice any unusual behavior, such as the airbag warning light staying on, to prevent issues like OBDII code B220F from occurring.