B220F Chrysler Code - Occupant Restraint Controller Control Driver 1
Quick Answer
When powered, the Occupant Restraint Controller (ORC) performs an internal self test. Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B220F Chrysler indicates Occupant Restraint Controller Control Driver 1.
- Common causes
- Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B220F Chrysler Description
What are the Possible Causes of the DTC B220F Chrysler?
- Faulty Occupant Restraint Controller (ORC)
- Occupant Restraint Controller (ORC) harness is open or shorted
- Occupant Restraint Controller (ORC) circuit poor electrical connection
How to Fix the DTC B220F Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B220F Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B220F Chrysler code?
Need more information on how to fix the B220F Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B220F Chrysler code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B220F Chrysler Code
1. What does the OBDII code B220F mean on a Chrysler vehicle?
The B220F code indicates an issue with the Occupant Restraint Controller (ORC) related to the Control Driver 1 circuit, which can affect the airbag system.
2. What are the common symptoms of the B220F code?
Symptoms may include the airbag warning light turning on, a "Service Airbag System" message on the dashboard, or the airbags potentially not deploying in an accident.
3. What causes the B220F code on a Chrysler?
Common causes include a faulty Occupant Restraint Controller, damaged wiring or connectors in the airbag system, or a software issue in the ORC module.
4. Is it safe to drive with the B220F code present?
No, it is not safe to drive with this code because it indicates a potential malfunction in the airbag system, which may fail to protect occupants in a collision.
5. How can I diagnose the B220F code?
Diagnosis involves using an OBDII scanner to confirm the code, visually inspecting the wiring and connectors for damage, and testing the Occupant Restraint Controller.
6. Can a loose connection cause the B220F code?
Yes, a loose or corroded connection in the airbag system wiring can trigger the B220F code.
7. What repairs are needed to fix the B220F code?
Repairs may include replacing or repairing damaged wiring, securing loose connections, or replacing the faulty Occupant Restraint Controller module.
8. Can the B220F code be caused by a low battery?
Yes, a low battery or voltage fluctuations can sometimes cause communication errors in the ORC module, leading to the B220F code.
9. How much does it cost to fix the B220F code on a Chrysler?
The repair cost varies but can range from $150 to $1,000 depending on whether wiring repairs or a full replacement of the ORC module is needed.
10. Do I need to reset the system after repairing the B220F code?
Yes, after completing repairs, the airbag system and OBDII codes should be cleared using a scanner to ensure the issue is resolved.
Discuss the causes and fixes for B220F Chrysler OBDII Code
Code B220F Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
