B1D7A Code - Seat Recliner Position Sensor Circuit High
Quick Answer
The power seat system receives battery current through a 50 amp fuse in the Power Distribution Center (PDC) so that the power seats remain operational, regardless of the ignition switch position. Common causes include Faulty Seat Recliner Position Sensor, Seat Recliner Position Sensor harness is open or shorted, Seat Recliner Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1D7A indicates Seat Recliner Position Sensor Circuit High.
- Common causes
- Common causes include Faulty Seat Recliner Position Sensor, Seat Recliner Position Sensor harness is open or shorted, Seat Recliner Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1D7A Description
When a power seat switch is actuated, a battery feed and a ground path are applied through the power seat switch contacts to the appropriate motor or motors. The motor and drive unit operate to move the seat in the selected direction until the switch is released, or until the travel limit of the power seat track is reached. When the switch is moved in the opposite direction, the battery feed and ground path to the motor is reversed through the switch contacts. This causes the motor to run in the opposite direction.
When the seat motor is activated sensor supply voltage is switched on whenever motor is activated. If sensor voltage is not within a specified range this Diagnostic Trouble Code (DTC) will set. This DTC will only set when the seat switch is moved in the same direction three consecutive times.
What are the Possible Causes of the DTC B1D7A?
- Faulty Seat Recliner Position Sensor
- Seat Recliner Position Sensor harness is open or shorted
- Seat Recliner Position Sensor circuit poor electrical connection
- Driver Recliner Seat Adjuster Motor
- Faulty Memory Seat Module
How to Fix the DTC B1D7A?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1D7A code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1D7A code?
Need more information on how to fix the B1D7A code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1D7A code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B1D7A Chrysler — Seat Recliner Position Sensor Circuit High
- B1D7A Dodge — Seat Recliner Position Sensor Circuit High
- B1D7A Jeep — Seat Recliner Position Sensor Circuit High
- B1D7A RAM — Seat Recliner Position Sensor Circuit High
Frequently Asked Questions about B1D7A Code
1. What does OBDII code B1D7A mean?
Code B1D7A indicates a high voltage condition in the seat recliner position sensor circuit, which monitors the position of the seat's recliner mechanism.
2. What are the common symptoms of code B1D7A?
Symptoms may include a malfunctioning seat recliner, inability to adjust the seat position, or the activation of a warning light on the dashboard.
3. What causes the B1D7A code to appear?
Common causes include a faulty seat recliner position sensor, damaged wiring or connectors in the circuit, or an issue with the vehicle’s control module.
4. How is the B1D7A code diagnosed?
A technician will use a scan tool to confirm the code, inspect the wiring and connectors for damage, and test the seat recliner position sensor for proper function.
5. Can I still drive my car with the B1D7A code?
Yes, but the seat adjustment functionality may be compromised, which could affect comfort and safety during driving.
6. How do I fix the B1D7A code?
Repairs may involve replacing the seat recliner position sensor, repairing damaged wiring or connectors, or reprogramming the control module if necessary.
7. How much does it cost to fix the B1D7A code?
The repair cost can vary depending on the issue, but replacing a seat recliner position sensor typically ranges from $150 to $400, including parts and labor.
8. Can I reset the B1D7A code without fixing the issue?
You can clear the code using an OBDII scanner, but it will likely reappear until the underlying problem is resolved.
9. Is the B1D7A code specific to certain car brands?
While OBDII codes are standardized, some codes like B1D7A may be more common in specific vehicle makes or models with advanced seat adjustment features.
10. How can I prevent the B1D7A code from occurring?
Regularly inspect and maintain the seat adjustment mechanisms, ensure wiring and connectors are intact, and avoid excessive force when adjusting the seat position.
Discuss the causes and fixes for B1D7A OBDII Code
Code B1D7A comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
