B1D7A Chrysler Code - Seat Recliner Position Sensor Circuit High
Quick Answer
The power seat system receives battery current through a 50 amp fuse in the Power Distribution Center (PDC) so that the power seats remain operational, regardless of the ignition switch position. Common causes include Faulty Seat Recliner Position Sensor, Seat Recliner Position Sensor harness is open or shorted, Seat Recliner Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1D7A Chrysler indicates Seat Recliner Position Sensor Circuit High.
- Common causes
- Common causes include Faulty Seat Recliner Position Sensor, Seat Recliner Position Sensor harness is open or shorted, Seat Recliner Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1D7A Chrysler Description
When a power seat switch is actuated, a battery feed and a ground path are applied through the power seat switch contacts to the appropriate motor or motors. The motor and drive unit operate to move the seat in the selected direction until the switch is released, or until the travel limit of the power seat track is reached. When the switch is moved in the opposite direction, the battery feed and ground path to the motor is reversed through the switch contacts. This causes the motor to run in the opposite direction.
When the seat motor is activated sensor supply voltage is switched on whenever motor is activated. If sensor voltage is not within a specified range this Diagnostic Trouble Code (DTC) will set. This DTC will only set when the seat switch is moved in the same direction three consecutive times.
What are the Possible Causes of the DTC B1D7A Chrysler?
- Faulty Seat Recliner Position Sensor
- Seat Recliner Position Sensor harness is open or shorted
- Seat Recliner Position Sensor circuit poor electrical connection
- Driver Recliner Seat Adjuster Motor
- Faulty Memory Seat Module
How to Fix the DTC B1D7A Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1D7A Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1D7A Chrysler code?
Need more information on how to fix the B1D7A Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1D7A Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1D7A Chrysler Code
1. What does the OBDII code B1D7A mean on a Chrysler vehicle?
The code B1D7A indicates a high voltage issue in the seat recliner position sensor circuit, which monitors the position of the seatback recliner.
2. What are the common symptoms of the B1D7A code?
Symptoms may include improper seat recliner functionality, the seatback not adjusting as intended, or an illuminated airbag or seatbelt indicator light.
3. What causes the B1D7A code to appear?
Possible causes include a faulty seat recliner position sensor, damaged wiring or connectors in the sensor circuit, or a malfunction in the control module.
4. Can I still drive my vehicle with a B1D7A code?
Yes, you can still drive the vehicle, but the seat recliner may not function properly, and it could impact safety features like airbags if the seat position is not correctly detected.
5. How do I diagnose the B1D7A code?
Start by inspecting the seat recliner position sensor, checking for damaged wiring, loose connections, or corrosion. Use a multimeter to test the sensor circuit for high voltage or continuity issues.
6. How is the B1D7A code fixed?
Repairs may involve replacing the faulty seat recliner position sensor, repairing or replacing damaged wiring, or reprogramming/updating the control module if necessary.
7. How much does it cost to fix the B1D7A code?
The repair cost varies but typically ranges from $100 to $300, depending on whether the issue is a simple wiring repair or requires replacing the seat position sensor.
8. Can I clear the B1D7A code without repairing the issue?
Clearing the code with a scan tool is possible, but if the underlying problem isn’t fixed, the code will return.
9. Is the B1D7A code related to seat position memory issues?
Yes, it can be, as the seat recliner position sensor is involved in detecting and storing seat positions for memory functions.
10. Can a blown fuse cause the B1D7A code?
While rare, a blown fuse related to the seat control module or sensor circuit could contribute to the issue and should be checked during diagnosis.
Discuss the causes and fixes for B1D7A Chrysler OBDII Code
Code B1D7A Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
