AutoCodes – Generic – B1BB8

B1BB8 Code - SRS Warning Indicator Status Mismatch

Quick Answer

After the Instrument Cluster bulb check is completed, the Occupant Restraint Controller (ORC) compares the lamp request by the ORC (On or Off) and the Lamp On request by the Instrument Cluster (On or Off) Can bus messages. Common causes include Faulty Instrument Cluster, Faulty Occupant Restraint Controller (ORC). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1BB8 indicates SRS Warning Indicator Status Mismatch.
Common causes: Common causes include Faulty Instrument Cluster, Faulty Occupant Restraint Controller (ORC).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,372

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 23, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1BB8 Description

After the Instrument Cluster bulb check is completed, the Occupant Restraint Controller (ORC) compares the lamp request by the ORC (On or Off) and the Lamp On request by the Instrument Cluster (On or Off) Can bus messages. Each message is transmitted one time per second or when a change in the lap state occurs. If the lamp request by the ORC (On or Off), and the Lamp On by the Instrument Cluster (On or Off), messages do not match, this code will set.

OBDII Code B1BB8 - SRS Warning Indicator Status Mismatch - AutoCodes.com — B1BB8 Code - SRS Warning Indicator Status Mismatch

What does this mean?

What are the Possible Causes of the DTC B1BB8?

Faulty Instrument Cluster
Faulty Occupant Restraint Controller (ORC)

How to Fix the DTC B1BB8?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1BB8 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1BB8 code?

Need more information on how to fix the B1BB8 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1BB8 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B1BB8 Chrysler — SRS Warning Indicator Status Mismatch
B1BB8 Dodge — SRS Warning Indicator Status Mismatch
B1BB8 Jeep — SRS Warning Indicator Status Mismatch
B1BB8 Mitsubishi — SRS Warning Indicator Status Mismatch
B1BB8 RAM — SRS Warning Indicator Status Mismatch

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1BB8 Code

What does OBDII code B1BB8 mean?

OBDII code B1BB8 indicates a "SRS Warning Indicator Status Mismatch," meaning there is a discrepancy between the status of the airbag warning light and the expected status based on the system's parameters.

What are the common symptoms of B1BB8?

Common symptoms include the airbag warning light being illuminated on the dashboard and potential issues with the airbag system functioning properly during a crash.

What could cause the B1BB8 code to trigger?

Causes may include a faulty airbag warning light, issues with the airbag control module, wiring problems, or a malfunction in the sensor system.

Can I drive my vehicle with the B1BB8 code?

While you can drive the vehicle, it is not advisable as the airbag system may not deploy in the event of an accident, increasing the risk of injury.

How can I diagnose the B1BB8 code?

To diagnose B1BB8, use an OBDII scanner to confirm the code, inspect the airbag warning light circuit and related components, and check for any additional codes that may provide more context.

What repairs are commonly recommended for B1BB8?

Repairs may involve replacing a faulty airbag warning light, fixing wiring issues, or reprogramming or replacing the airbag control module, depending on the underlying cause.

Is it safe to reset the OBDII code B1BB8 without repairs?

No, simply resetting the code without addressing the underlying issue is not safe, as it does not fix the problem and the airbag system may still be compromised.

How much does it typically cost to repair B1BB8?

Repair costs can vary widely, ranging from $100 to $1,000 or more, depending on the specific issue, parts needed, and labor costs in your area.

Can I fix the B1BB8 code myself?

If you have experience with automotive electrical systems, you may be able to diagnose and repair the issue. However, for safety-critical systems like airbags, it is often best to consult a professional mechanic.