B1BB8 Chrysler Code - SRS Warning Indicator Status Mismatch
Quick Answer
After the Instrument Cluster bulb check is completed, the Occupant Restraint Controller (ORC) compares the lamp request by the ORC (On or Off) and the Lamp On request by the Instrument Cluster (On or Off) Can bus messages. Common causes include Faulty Instrument Cluster, Faulty Occupant Restraint Controller (ORC). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1BB8 Chrysler indicates SRS Warning Indicator Status Mismatch.
- Common causes
- Common causes include Faulty Instrument Cluster, Faulty Occupant Restraint Controller (ORC).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1BB8 Chrysler Description
What are the Possible Causes of the DTC B1BB8 Chrysler?
- Faulty Instrument Cluster
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B1BB8 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1BB8 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1BB8 Chrysler code?
Need more information on how to fix the B1BB8 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1BB8 Chrysler code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1BB8 Chrysler Code
1. What does the OBDII code B1BB8 Chrysler indicate?
The B1BB8 code indicates an SRS Warning Indicator Status Mismatch in the vehicle's Supplemental Restraint System.
2. What are the common symptoms of the SRS Warning Indicator Status Mismatch?
Common symptoms include the airbag warning light staying illuminated on the dashboard and potential issues with the airbag system.
3. What are the possible causes of the SRS Warning Indicator Status Mismatch code?
Possible causes include a faulty SRS module, damaged wiring or connectors in the airbag system, or a software-related issue.
4. How can I diagnose the SRS Warning Indicator Status Mismatch code?
Diagnosis typically involves using a professional OBDII scanner to retrieve the specific code, checking the wiring and connectors in the airbag system, and inspecting the SRS module for any signs of damage.
5. Can I continue driving my vehicle with the SRS Warning Indicator Status Mismatch code?
It is not recommended to drive the vehicle with the airbag warning light illuminated, as it indicates a potential issue with the airbag system's functionality.
6. How can I repair the SRS Warning Indicator Status Mismatch issue?
Repair options may include replacing the faulty SRS module, repairing or replacing damaged wiring or connectors, and performing any necessary software updates.
7. Is the SRS Warning Indicator Status Mismatch a serious issue?
Yes, the SRS Warning Indicator Status Mismatch is a serious issue as it indicates a potential problem with the vehicle's airbag system, which is crucial for occupant safety in the event of a collision.
8. Can I reset the SRS Warning Indicator Status Mismatch code myself?
While you may be able to clear the code using an OBDII scanner, it is important to diagnose and address the underlying issue causing the code to prevent it from reoccurring.
9. Will the SRS Warning Indicator Status Mismatch code affect my vehicle's overall performance?
The code itself may not directly affect the vehicle's performance, but it does indicate a safety concern that should be addressed promptly to ensure the proper functioning of the airbag system.
10. How much does it typically cost to repair the SRS Warning Indicator Status Mismatch issue?
The cost of repair can vary depending on the specific cause of the issue, but it may involve parts replacement, wiring repairs, and potential labor costs, which can range from a few hundred to over a thousand dollars.
Discuss the causes and fixes for B1BB8 Chrysler OBDII Code
Code B1BB8 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
