B1B92 Code - Passenger Seat Track Position Sensor Circuit Performance
Quick Answer
The Occupant Classification Module (OCM) monitors the Driver Seat Track Position Sensor. Common causes include Faulty Passenger Seat Track Position Sensor, Passenger Seat Track Position Sensor harness is open or shorted, Passenger Seat Track Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B92 indicates Passenger Seat Track Position Sensor Circuit Performance.
- Common causes
- Common causes include Faulty Passenger Seat Track Position Sensor, Passenger Seat Track Position Sensor harness is open or shorted, Passenger Seat Track Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1B92 Description
What are the Possible Causes of the DTC B1B92?
- Faulty Passenger Seat Track Position Sensor
- Passenger Seat Track Position Sensor harness is open or shorted
- Passenger Seat Track Position Sensor circuit poor electrical connection
- Faulty Occupant Classification Module (OCM)
How to Fix the DTC B1B92?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1B92 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1B92 code?
Need more information on how to fix the B1B92 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B92 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B1B92 Chrysler — Passenger Seat Track Position Sensor Circuit Performance
- B1B92 Dodge — Passenger Seat Track Position Sensor Circuit Performance
- B1B92 Jeep — Passenger Seat Track Position Sensor Circuit Performance
- B1B92 Mitsubishi — Passenger Seat Track Position Sensor Circuit Performance
- B1B92 RAM — Passenger Seat Track Position Sensor Circuit Performance
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B92 Code
1. What does the OBDII code B1B92 mean?
B1B92 refers to a problem with the performance of the passenger seat track position sensor circuit, which monitors and reports the seat's position to the vehicle's control module.
2. What are the common symptoms of code B1B92?
Symptoms may include an illuminated airbag warning light, malfunctioning passenger airbag system, or failure of the seat position sensor to provide accurate data.
3. What causes the B1B92 code to appear?
Common causes include a faulty passenger seat track position sensor, damaged wiring or connectors, or a malfunction in the airbag system control module.
4. Can I drive my car with the B1B92 code active?
It is generally safe to drive, but the passenger airbag system may not function correctly, which could pose a safety risk in an accident.
5. How do I diagnose the B1B92 code?
Diagnosis involves using an OBDII scanner to confirm the code, checking the passenger seat track position sensor, inspecting wiring and connectors, and testing the airbag control module.
6. How do I fix the B1B92 code?
Repairs may include replacing the faulty seat track position sensor, repairing damaged wiring or connectors, or reprogramming or replacing the airbag control module.
7. How much does it cost to fix a B1B92 code?
Repair costs can range from $100 to $400, depending on whether the issue is with the sensor, wiring, or control module.
8. Can a blown fuse cause the B1B92 code?
Yes, a blown fuse in the airbag system circuit can potentially cause this code, as it may disrupt power to the seat track position sensor.
9. Do I need to reset the airbag system after fixing the B1B92 code?
Yes, after repairs, you should use an OBDII scanner to clear the code and reset the airbag system to ensure proper functionality.
10. Can I fix the B1B92 code myself?
If you have basic automotive repair skills, you may be able to inspect wiring and replace the sensor yourself, but complex issues may require professional assistance.
Discuss the causes and fixes for B1B92 OBDII Code
Code B1B92 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
