B1B0D Code - Passenger Airbag Squib 2 Circuit High
Quick Answer
When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. Common causes include Faulty Passenger Airbag Squib 2, Passenger Airbag Squib 2 harness is open or shorted, Passenger Airbag Squib 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B0D indicates Passenger Airbag Squib 2 Circuit High.
- Common causes
- Common causes include Faulty Passenger Airbag Squib 2, Passenger Airbag Squib 2 harness is open or shorted, Passenger Airbag Squib 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1B0D Description
What are the Possible Causes of the DTC B1B0D?
- Faulty Passenger Airbag Squib 2
- Passenger Airbag Squib 2 harness is open or shorted
- Passenger Airbag Squib 2 circuit poor electrical connection
- Faulty Passenger Airbag
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B1B0D?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1B0D code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1B0D code?
Need more information on how to fix the B1B0D code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B0D code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B1B0D Chrysler — Passenger Airbag Squib 2 Circuit High
- B1B0D Dodge — Passenger Airbag Squib 2 Circuit High
- B1B0D Jeep — Passenger Airbag Squib 2 Circuit High
- B1B0D Mitsubishi — Passenger Airbag Squib 2 Circuit High
- B1B0D RAM — Passenger Airbag Squib 2 Circuit High
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B0D Code
1. What are the common symptoms of OBDII code B1B0D - Passenger Airbag Squib 2 Circuit High?
- Common symptoms include the airbag warning light staying illuminated on the dashboard and potential issues with the passenger airbag system.
2. What does the B1B0D code mean?
- The B1B0D code indicates a high voltage condition in the circuit related to the passenger airbag squib 2, which could affect the deployment of the airbag in case of an accident.
3. What are the possible causes of the B1B0D code?
- Possible causes include a faulty passenger airbag squib, damaged wiring or connectors in the airbag system, or a problem with the airbag control module.
4. How can I diagnose the B1B0D code?
- Diagnosing the B1B0D code usually involves using an OBDII scanner to retrieve the code, inspecting the airbag system's wiring and connectors, and testing the passenger airbag squib for proper operation.
5. Is it safe to drive with the B1B0D code present?
- It is not recommended to drive with the B1B0D code active, as it indicates a potential issue with the passenger airbag system, which could affect its functionality in the event of a collision.
6. Can I reset the B1B0D code myself?
- While you can clear the B1B0D code with an OBDII scanner, it is important to address the underlying issue causing the code to prevent it from reoccurring.
7. How much does it typically cost to repair the B1B0D code?
- The cost of repairing the B1B0D code can vary depending on the specific cause of the issue, but it may involve replacing the passenger airbag squib, repairing damaged wiring, or reprogramming the airbag control module.
8. Are there any DIY repair tips for the B1B0D code?
- DIY repair tips may include checking for loose or damaged wiring in the airbag system, ensuring connectors are securely attached, and following the manufacturer's diagnostic procedures for the specific code.
9. Can the B1B0D code be intermittent?
- Yes, the B1B0D code can sometimes be intermittent, meaning the issue may come and go. It is important to address intermittent codes promptly to ensure the safety of the airbag system.
10. Should I have the B1B0D code repaired by a professional technician?
- It is recommended to have the B1B0D code diagnosed and repaired by a qualified automotive technician with experience in airbag systems to ensure the proper functioning and safety of the system.
Discuss the causes and fixes for B1B0D OBDII Code
Code B1B0D comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
