AutoCodes – Dodge – B1B0D Dodge

B1B0D Dodge Code - Passenger Airbag Squib 2 Circuit High

Quick Answer

When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. Common causes include Faulty Passenger Airbag Squib 2, Passenger Airbag Squib 2 harness is open or shorted, Passenger Airbag Squib 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1B0D Dodge indicates Passenger Airbag Squib 2 Circuit High.
Common causes: Common causes include Faulty Passenger Airbag Squib 2, Passenger Airbag Squib 2 harness is open or shorted, Passenger Airbag Squib 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 585

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 15, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1B0D Dodge Description

When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. These circuits are maintained in a "floating" configuration at the module (connected to neither power nor ground), as protection against inadvertent deployment. The use of the SRS Load Tool Adapter provides a test point as well as a method for opening the shorting bar connections within the harness connector. The ORC sends out a 40 mA diagnostic current on each squib voltage supply circuit at power up and every 500 ms thereafter while the ignition is on.

OBDII Code B1B0D Dodge - Passenger Airbag Squib 2 Circuit High - AutoCodes.com — B1B0D Dodge Code - Passenger Airbag Squib 2 Circuit High

What does this mean?

What are the Possible Causes of the DTC B1B0D Dodge?

Faulty Passenger Airbag Squib 2
Passenger Airbag Squib 2 harness is open or shorted
Passenger Airbag Squib 2 circuit poor electrical connection
Faulty Passenger Airbag
Faulty Occupant Restraint Controller (ORC)

How to Fix the DTC B1B0D Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1B0D Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1B0D Dodge code?

Need more information on how to fix the B1B0D Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1B0D Dodge code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1B0D Dodge Code

1. What are the common symptoms of OBDII code B1B0D Dodge (Passenger Airbag Squib 2 Circuit High)?

- Common symptoms include the airbag warning light illuminating on the dashboard and a potential loss of functionality of the passenger airbag system.

2. What could cause the OBDII code B1B0D Dodge to trigger?

- The code B1B0D Dodge (Passenger Airbag Squib 2 Circuit High) may be triggered by a faulty passenger airbag squib 2 circuit, a damaged wiring harness, or a problem with the airbag control module.

3. How serious is the OBDII code B1B0D Dodge (Passenger Airbag Squib 2 Circuit High)?

- This code indicates a potential issue with the passenger airbag system, which is a critical safety component. It is important to address this issue promptly to ensure the proper functioning of the airbag in the event of an accident.

4. What steps can I take to diagnose the OBDII code B1B0D Dodge?

- Diagnosing this code typically involves using a diagnostic scanner to read the fault codes, inspecting the passenger airbag squib 2 circuit, checking the wiring for damage, and testing the components for proper functionality.

5. Can I drive my vehicle with the OBDII code B1B0D Dodge (Passenger Airbag Squib 2 Circuit High)?

- It is not recommended to drive the vehicle with this code present, as it indicates a potential issue with the passenger airbag system, which could compromise safety in the event of a collision.

6. How can I repair the OBDII code B1B0D Dodge (Passenger Airbag Squib 2 Circuit High)?

- Repairing this code may involve replacing the faulty passenger airbag squib 2 circuit, repairing or replacing damaged wiring, or addressing any issues with the airbag control module.

7. Is it possible to reset the OBDII code B1B0D Dodge (Passenger Airbag Squib 2 Circuit High) without fixing the underlying issue?

- While clearing the fault code may temporarily turn off the warning light, it is not recommended to reset the code without addressing the underlying issue, as it could pose a safety risk.

8. Can I repair the OBDII code B1B0D Dodge (Passenger Airbag Squib 2 Circuit High) myself?

- Repairing this code may require advanced knowledge of automotive electrical systems and airbag components. It is recommended to consult with a professional mechanic or technician for proper diagnosis and repair.

9. How much does it typically cost to repair the OBDII code B1B0D Dodge (Passenger Airbag Squib 2 Circuit High)?

- The cost of repairing this code can vary depending on the extent of the issue, the parts needed for repair, and labor costs. It is advisable to obtain quotes from different repair shops for an accurate estimate.

10. Are there any recalls or technical service bulletins related to the OBDII code B1B0D Dodge (Passenger Airbag Squib 2 Circuit High)?

- It is recommended to check with Dodge dealerships or official sources to see if there are any recalls or technical service bulletins related to this specific OBDII code to address the issue.