AutoCodes – Generic – B19DB

B19DB Code - Right Power Sliding Door Close Direction Pawl Switch Performance

Quick Answer

This code will set when the pawl switch has been detected before the door enters into secondary position during a closing operation. Common causes include Power Sliding Door Module Out Of Calibration, Faulty Right Pawl Switch Sense, Right Pawl Switch Sense harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B19DB indicates Right Power Sliding Door Close Direction Pawl Switch Performance.
Common causes: Common causes include Power Sliding Door Module Out Of Calibration, Faulty Right Pawl Switch Sense, Right Pawl Switch Sense harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,549

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 05, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B19DB Description

This code will set when the pawl switch has been detected before the door enters into secondary position during a closing operation.

OBDII Code B19DB - Right Power Sliding Door Close Direction Pawl Switch Performance - AutoCodes.com — B19DB Code - Right Power Sliding Door Close Direction Pawl Switch Performance

What does this mean?

What are the Possible Causes of the DTC B19DB?

Power Sliding Door Module Out Of Calibration
Faulty Right Pawl Switch Sense
Right Pawl Switch Sense harness is open or shorted
Right Pawl Switch Sense circuit poor electrical connection
Faulty Right Power Sliding Door Latch
Faulty Rear Door Module

How to Fix the DTC B19DB?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B19DB code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B19DB code?

Need more information on how to fix the B19DB code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B19DB code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B19DB Chrysler — Right Power Sliding Door Close Direction Pawl Switch Performance
B19DB Dodge — Right Power Sliding Door Close Direction Pawl Switch Performance
B19DB Jeep — Right Power Sliding Door Close Direction Pawl Switch Performance
B19DB RAM — Right Power Sliding Door Close Direction Pawl Switch Performance

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B19DB Code

1. What are the common symptoms of OBDII code B19DB?

Symptoms of code B19DB may include issues with the right power sliding door not closing properly or intermittently, unusual noises during door operation, or a warning light on the dashboard.

2. What causes OBDII code B19DB to trigger?

This code is typically triggered by a malfunction in the right power sliding door close direction pawl switch, which is responsible for detecting the door's position during closing.

3. How can I diagnose the issue related to code B19DB?

To diagnose the issue, you can use a diagnostic scanner to retrieve the specific fault code and conduct a visual inspection of the right power sliding door components for any visible damage or misalignment.

4. Can I still use the power sliding door if OBDII code B19DB is present?

It is not recommended to use the power sliding door if code B19DB is present, as it may lead to further damage or safety hazards. It's best to address the issue promptly.

5. Is it possible to reset OBDII code B19DB without repairing the pawl switch?

While you can clear the code temporarily by resetting the vehicle's computer, the underlying issue with the pawl switch should be properly repaired to prevent the code from reoccurring.

6. What are the repair options for addressing OBDII code B19DB?

Repair options may include replacing the right power sliding door close direction pawl switch, adjusting the switch for proper alignment, or repairing any damaged wiring related to the switch.

7. Can I fix OBDII code B19DB myself, or do I need professional help?

Depending on your experience and comfort level with automotive repairs, you may be able to address the issue yourself by following repair guides or consulting with a professional technician for assistance.

8. How long does it typically take to repair OBDII code B19DB?

The repair time for addressing code B19DB can vary depending on the exact cause of the issue and the repair method chosen. It may take anywhere from 30 minutes to a few hours to complete the repair.

9. Are there any preventative measures to avoid OBDII code B19DB in the future?

Regularly inspecting and maintaining the power sliding door components, including the pawl switch, can help prevent issues that lead to code B19DB. Addressing any abnormalities early can also help avoid triggering the code.

10. Does OBDII code B19DB pose any safety risks to vehicle occupants?

While code B19DB itself may not directly pose safety risks, a malfunctioning power sliding door can lead to potential hazards, such as the door not closing securely or unexpectedly opening while driving. It's important to address the issue promptly for safety reasons.