B19DB RAM Code - Right Power Sliding Door Close Direction Pawl Switch Performance
Quick Answer
This code will set when the pawl switch has been detected before the door enters into secondary position during a closing operation. Common causes include Power Sliding Door Module Out Of Calibration, Faulty Right Pawl Switch Sense, Right Pawl Switch Sense harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B19DB RAM indicates Right Power Sliding Door Close Direction Pawl Switch Performance.
- Common causes
- Common causes include Power Sliding Door Module Out Of Calibration, Faulty Right Pawl Switch Sense, Right Pawl Switch Sense harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B19DB RAM Description
What are the Possible Causes of the DTC B19DB RAM?
- Power Sliding Door Module Out Of Calibration
- Faulty Right Pawl Switch Sense
- Right Pawl Switch Sense harness is open or shorted
- Right Pawl Switch Sense circuit poor electrical connection
- Faulty Right Power Sliding Door Latch
- Faulty Rear Door Module
How to Fix the DTC B19DB RAM?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B19DB RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B19DB RAM code?
Need more information on how to fix the B19DB RAM code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B19DB RAM code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B19DB RAM Code
1. What are the common symptoms of OBDII code B19DB related to the Right Power Sliding Door Close Direction Pawl Switch Performance?
The common symptoms may include difficulty closing the power sliding door, intermittent door operation, or the door not closing securely.
2. What can cause the OBDII code B19DB to be triggered for the Right Power Sliding Door Close Direction Pawl Switch Performance?
The code B19DB can be triggered due to a faulty pawl switch, wiring issues, a malfunctioning door control module, or mechanical issues with the power sliding door mechanism.
3. How can I diagnose the cause of the Right Power Sliding Door Close Direction Pawl Switch Performance issue associated with code B19DB?
Diagnosing the issue involves checking the pawl switch for proper operation, inspecting the wiring for any damage or loose connections, scanning the door control module for error codes, and performing a comprehensive inspection of the power sliding door components.
4. Is it safe to continue driving with the OBDII code B19DB related to the Right Power Sliding Door Close Direction Pawl Switch Performance?
It is not recommended to continue driving with this code active, as it may result in potential safety hazards or further damage to the power sliding door system.
5. What are some repair tips for addressing the OBDII code B19DB for the Right Power Sliding Door Close Direction Pawl Switch Performance?
Repair tips may include replacing the faulty pawl switch, repairing any damaged wiring, resetting the door control module, lubricating the door mechanism, and performing a recalibration of the power sliding door system.
6. Can I reset the OBDII code B19DB for the Right Power Sliding Door Close Direction Pawl Switch Performance myself?
You can attempt to reset the code using an OBDII scanner, but it is crucial to diagnose and address the underlying issue causing the code before resetting it to prevent recurrence.
7. How much does it typically cost to repair the OBDII code B19DB related to the Right Power Sliding Door Close Direction Pawl Switch Performance?
The cost of repair can vary depending on the exact cause of the issue, the labor rates of the repair shop, and the cost of any replacement parts needed. It is advisable to obtain quotes from different shops for an accurate estimate.
8. Are there any recalls or technical service bulletins related to the OBDII code B19DB for the Right Power Sliding Door Close Direction Pawl Switch Performance?
It's recommended to check with the vehicle manufacturer or authorized dealerships for any recalls or technical service bulletins related to this specific OBDII code to see if there are any known issues or remedies provided.
9. How often does the Right Power Sliding Door Close Direction Pawl Switch Performance issue occur in vehicles?
The occurrence of this specific issue can vary depending on the make and model of the vehicle, the age of the power sliding door system, and the maintenance history. It is advisable to address any symptoms promptly to prevent further complications.
10. Can I prevent the OBDII code B19DB related to the Right Power Sliding Door Close Direction Pawl Switch Performance from occurring in the future?
Regular maintenance of the power sliding door system, including checking the pawl switch, lubricating the door mechanism, and addressing any issues promptly, can help prevent the recurrence of this OBDII code.
Discuss the causes and fixes for B19DB RAM OBDII Code
Code B19DB RAM comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
