B19C4 Code - Left Power Sliding Door Drive Close Direction Excessive Time
Quick Answer
This code will set when the Left Power Sliding Door module senses the Left Power Sliding Door Motor has taken longer than 20 seconds to complete a power closing operation. Common causes include Biding Power Sliding Door, Power Sliding Door Module Out Of Calibration, Faulty Left Power Sliding Door Motor Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B19C4 indicates Left Power Sliding Door Drive Close Direction Excessive Time.
- Common causes
- Common causes include Biding Power Sliding Door, Power Sliding Door Module Out Of Calibration, Faulty Left Power Sliding Door Motor Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B19C4 Description
What are the Possible Causes of the DTC B19C4?
- Biding Power Sliding Door
- Power Sliding Door Module Out Of Calibration
- Faulty Left Power Sliding Door Motor Assembly
- Left Power Sliding Door Motor Assembly harness is open or shorted
- Left Power Sliding Door Motor Assembly circuit poor electrical connection
- Faulty Power Sliding Door Module
How to Fix the DTC B19C4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B19C4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B19C4 code?
Need more information on how to fix the B19C4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B19C4 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B19C4 Chrysler — Left Power Sliding Door Drive Close Direction Excessive Time
- B19C4 Dodge — Left Power Sliding Door Drive Close Direction Excessive Time
- B19C4 Jeep — Left Power Sliding Door Drive Close Direction Excessive Time
- B19C4 RAM — Left Power Sliding Door Drive Close Direction Excessive Time
Frequently Asked Questions about B19C4 Code
1. What are the common symptoms of OBDII code B19C4?
- The common symptoms of OBDII code B19C4 include the power sliding door taking longer than usual to close, unusual noises during door operation, and in some cases, the door failing to close completely.
2. What can cause the OBDII code B19C4 to trigger?
- The OBDII code B19C4, indicating Left Power Sliding Door Drive Close Direction Excessive Time, can be triggered by issues such as a faulty power sliding door motor, damaged door track, misaligned door sensor, or a problem with the control module.
3. How can I diagnose the cause of OBDII code B19C4 at home?
- You can start diagnosing OBDII code B19C4 by visually inspecting the power sliding door components for any visible damage, checking the door alignment, testing the motor operation, and scanning the control module for error codes.
4. Is it safe to continue driving with OBDII code B19C4 present?
- It is not recommended to continue driving with OBDII code B19C4 present, as it may lead to further damage to the power sliding door mechanism and compromise the safety and functionality of the door.
5. What are some DIY repair tips for OBDII code B19C4?
- DIY repair tips for OBDII code B19C4 may include lubricating the door track, adjusting the door alignment, checking and replacing the motor if necessary, and resetting the control module to clear the error code.
6. Can I reset OBDII code B19C4 without fixing the underlying issue?
- While you can temporarily reset OBDII code B19C4 using an OBDII scanner, it is important to address the underlying issue causing the code to prevent recurring problems with the power sliding door.
7. How much does it typically cost to repair OBDII code B19C4 at a mechanic?
- The cost of repairing OBDII code B19C4 at a mechanic can vary depending on the exact cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.
8. Can extreme weather conditions contribute to triggering OBDII code B19C4?
- Yes, extreme weather conditions such as extreme heat or cold can affect the performance of power sliding doors and contribute to triggering OBDII code B19C4 due to increased stress on the door components.
9. Are there any recalls or technical service bulletins related to OBDII code B19C4?
- It is advisable to check with the vehicle manufacturer or authorized dealerships for any recalls or technical service bulletins related to OBDII code B19C4, as there may be known issues or solutions provided by the manufacturer.
10. Can a malfunctioning power sliding door affect other vehicle systems when OBDII code B19C4 is triggered?
- Yes, a malfunctioning power sliding door, indicated by OBDII code B19C4, can potentially affect other vehicle systems such as the electrical system, door sensors, and overall vehicle safety if not addressed promptly.
Discuss the causes and fixes for B19C4 OBDII Code
Code B19C4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
