B19C4 Jeep Code - Left Power Sliding Door Drive Close Direction Excessive Time
Quick Answer
This code will set when the Left Power Sliding Door module senses the Left Power Sliding Door Motor has taken longer than 20 seconds to complete a power closing operation. Common causes include Biding Power Sliding Door, Power Sliding Door Module Out Of Calibration, Faulty Left Power Sliding Door Motor Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B19C4 Jeep indicates Left Power Sliding Door Drive Close Direction Excessive Time.
- Common causes
- Common causes include Biding Power Sliding Door, Power Sliding Door Module Out Of Calibration, Faulty Left Power Sliding Door Motor Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B19C4 Jeep Description
What are the Possible Causes of the DTC B19C4 Jeep?
- Biding Power Sliding Door
- Power Sliding Door Module Out Of Calibration
- Faulty Left Power Sliding Door Motor Assembly
- Left Power Sliding Door Motor Assembly harness is open or shorted
- Left Power Sliding Door Motor Assembly circuit poor electrical connection
- Faulty Power Sliding Door Module
How to Fix the DTC B19C4 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B19C4 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B19C4 Jeep code?
Need more information on how to fix the B19C4 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B19C4 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B19C4 Jeep Code
1. What are the common symptoms of OBDII code B19C4 in a Jeep related to the Left Power Sliding Door Drive Close Direction Excessive Time?
The common symptoms include the power sliding door taking longer than usual to close, unusual noises during door operation, and potential intermittent operation issues.
2. What are some possible causes of OBDII code B19C4 in a Jeep?
Potential causes of this code may include a malfunctioning power sliding door motor, damaged door track or rollers, electrical wiring issues, or a faulty door control module.
3. How can I diagnose the issue causing OBDII code B19C4 in my Jeep's left power sliding door?
Diagnosis typically involves inspecting the power sliding door components for any visible damage, testing the motor's functionality, checking the electrical connections, and using a scan tool to retrieve specific error codes.
4. Are there any repair tips for fixing OBDII code B19C4 in a Jeep's power sliding door?
Repair tips may include cleaning and lubricating the door track and rollers, replacing the power sliding door motor, repairing damaged wiring, resetting the door control module, or recalibrating the door system.
5. Can I drive my Jeep safely with OBDII code B19C4 related to the left power sliding door issue?
It is not recommended to drive the vehicle with a malfunctioning power sliding door, as it may pose safety risks and further damage the door components. It is best to address the issue promptly.
6. How much does it typically cost to repair OBDII code B19C4 in a Jeep?
The cost of repair can vary depending on the specific cause of the issue and the extent of the repairs needed. It is advisable to consult with a professional mechanic for an accurate diagnosis and cost estimate.
7. Can I reset OBDII code B19C4 in my Jeep on my own?
While you may be able to clear the error code using an OBDII scanner, it is important to address the underlying issue causing the code to prevent it from reoccurring. Simply clearing the code without fixing the problem is not a permanent solution.
8. Is OBDII code B19C4 specific to Jeep vehicles only?
Yes, OBDII code B19C4 related to the Left Power Sliding Door Drive Close Direction Excessive Time is specific to Jeep vehicles equipped with power sliding doors experiencing prolonged closing times.
9. How urgent is it to address OBDII code B19C4 in a Jeep?
While the severity of the issue may vary, it is advisable to address OBDII code B19C4 promptly to prevent further damage to the power sliding door system and ensure the safe operation of the vehicle.
10. Are there any recalls or technical service bulletins related to OBDII code B19C4 in Jeep vehicles?
It is recommended to check with the manufacturer or a Jeep dealership for any recalls or technical service bulletins related to OBDII code B19C4 in your specific Jeep model to see if there are any related known issues or remedies.
Discuss the causes and fixes for B19C4 Jeep OBDII Code
Code B19C4 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
