AutoCodes – Generic – B1614

B1614 Code - Wiper Rear Mode Select Switch Circuit Short To Ground

Quick Answer

The Body Control Module (BCM) monitors the Wiper Rear Mode Select Switch. Common causes include Faulty Wiper Rear Mode Select Switch, Wiper Rear Mode Select Switch harness is open or shorted, Wiper Rear Mode Select Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1614 indicates Wiper Rear Mode Select Switch Circuit Short To Ground.
Common causes: Common causes include Faulty Wiper Rear Mode Select Switch, Wiper Rear Mode Select Switch harness is open or shorted, Wiper Rear Mode Select Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 7,181

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 21, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1614 Description

The Body Control Module (BCM) monitors the Wiper Rear Mode Select Switch. The BCM sets the OBDII code when the Wiper Rear Mode Select Switch is not to factory specifications.

OBDII Code B1614 - Wiper Rear Mode Select Switch Circuit Short To Ground - AutoCodes.com — B1614 Code - Wiper Rear Mode Select Switch Circuit Short To Ground

What does this mean?

What are the Possible Causes of the DTC B1614?

Faulty Wiper Rear Mode Select Switch
Wiper Rear Mode Select Switch harness is open or shorted
Wiper Rear Mode Select Switch circuit poor electrical connection
Faulty Body Control Module (BCM)

How to Fix the DTC B1614?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1614 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1614 code?

Need more information on how to fix the B1614 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1614 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B1614 Chrysler — Panel Illumination Control Circuit High
B1614 Dodge — Panel Illumination Control Circuit High
B1614 Jeep — Panel Illumination Control Circuit High
B1614 RAM — Panel Illumination Control Circuit High

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1614 Code

1. What are common symptoms of OBDII code B1614?

- Common symptoms include the rear wiper not working, the rear wiper operating intermittently, or the rear wiper not responding to controls.

2. What does OBDII code B1614 indicate?

- OBDII code B1614 indicates a circuit short to ground in the rear wiper mode select switch.

3. What are possible causes of OBDII code B1614?

- Possible causes include a faulty rear wiper mode select switch, damaged wiring in the circuit, or a short to ground in the rear wiper system.

4. How can I diagnose OBDII code B1614?

- Diagnosis involves inspecting the rear wiper mode select switch, testing the wiring for continuity and shorts, and using a multimeter to check for proper voltage.

5. How can I repair OBDII code B1614?

- Repair options may include replacing the rear wiper mode select switch, repairing damaged wiring, or fixing the short to ground in the circuit.

6. Can OBDII code B1614 be safely ignored?

- Ignoring the code is not recommended as it can lead to rear wiper malfunctions and compromise visibility while driving in adverse weather conditions.

7. Is it safe to drive with OBDII code B1614 present?

- It is generally safe to drive with the code present, but it is important to address the issue promptly to ensure the rear wiper functions properly when needed.

8. How much does it typically cost to repair OBDII code B1614?

- The cost of repair can vary depending on the underlying cause, but it may range from around $100 to $300 for parts and labor.

9. Can I reset OBDII code B1614 without repairing the issue?

- While you can clear the code temporarily, it will likely reappear until the root cause of the circuit short to ground is resolved.

10. Are there any preventive measures to avoid OBDII code B1614 in the future?

- Regularly inspecting the rear wiper system, avoiding water damage to the switch, and addressing any electrical issues promptly can help prevent OBDII code B1614 from occurring.