AutoCodes.com | All About OBDII Engine Codes
AutoCodes - Generic - B1472

B1472 Code - Lamp Headlamp Input Circuit Short To Ground

- Code Popularity: 8,670 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents
By AutoCodes.com - Updated Apr 14, 2019
Share on Facebook   Share on Twitter   Share on Linkedin

|Code B1472 Possible Causes

  • Faulty Headlamp Switch
  • Headlamp Switch harness is open or shorted
  • Headlamp Switch circuit poor electrical connection
  • Faulty Smart Junction Box (SJB)

|How do I Fix the Code B1472?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Does your Car have Safety Recalls? → Check here

|What is the Cost to Diagnose the Code B1472?

Labor: 1.0

The cost of diagnosing the B1472 code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

|What are Code B1472 Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|Code B1472 Description

The Smart Junction Box (SJB) sends reference signals to the headlamp switch through circuits. When the headlamp switch is placed in the HEADLAMPS ON position, the voltage signal is routed to ground through the circuit. If the SJB detects a fault with the headlamp switch inputs, the SJB turns the exterior lamps on by default. When the SJB detects the headlamp switch in the HEADLAMPS ON position and the multifunction switch in the LOW BEAM position, the SJB sends voltage through circuits to the low beam headlamps. When the SJB detects the headlamp switch in the HEADLAMPS ON position and the multifunction switch in the HIGH BEAM position, the SJB sends voltage through circuits to the high beam headlamps. The SJB sends a reference signal to the multifunction switch through circuits CLF27 (GN/BN) and CLF17 (WH/OG). When the multifunction switch is placed in the FLASH-TO-PASS or HIGH BEAM position, the voltage signal is routed to ground. When the SJB detects a request for the flash-to-pass, the SJB sends voltage to the high beam headlamps. The OBDII codes when the SJB detects a short to ground from the headlamps on request circuit or no input from the headlamp switch.

OBDII Code B1472 - Lamp Headlamp Input Circuit Short To Ground - AutoCodes.com
B1472 Code - Lamp Headlamp Input Circuit Short To Ground

|Need More Information on the B1472 Code?

Need more information on how to fix the B1472 code? Get Access to Factory Service Manuals

|Information for Specific Makes

  • B1472 Chrysler Channel 4 Audio Speaker Output Circuit Open
  • B1472 Dodge Channel 4 Audio Speaker Output Circuit Open
  • B1472 Ford Lamp Headlamp Input Circuit Short To Ground
  • B1472 Jeep Channel 4 Audio Speaker Output Circuit Open
  • B1472 Lexus A/C Inverter High Voltage Output System Malfunction
  • B1472 Lincoln Lamp Headlamp Input Circuit Short To Ground
  • B1472 Mercury Lamp Headlamp Input Circuit Short To Ground
  • B1472 RAM Channel 4 Audio Speaker Output Circuit Open
  • B1472 Toyota A/C Inverter High Voltage Output System Malfunction

|Need Help with the B1472 Code?

Get the B1472 code diagnosed by a professional: Find a repair shop in your area

|Code B1472 comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the B1472 code? Have you replaced any parts?
Any information is appreciated. Thanks