AutoCodes.com | All About OBDII Engine Codes
AutoCodes - Ford - B1472 Ford

B1472 Ford Code - Lamp Headlamp Input Circuit Short To Ground

- Code Popularity: 2,864 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents
Share on Facebook   Share on Twitter   Share on Linkedin

What are the Possible Causes of the DTC B1472 Ford?

NOTE: The causes shown may not be a complete list of all potential problems, and it is possible that there may be other causes.
  • Faulty Headlamp Switch
  • Headlamp Switch harness is open or shorted
  • Headlamp Switch circuit poor electrical connection
  • Faulty Smart Junction Box (SJB)
⚠ Does your Ford have Safety Recalls? → Check here

How to Fix the DTC B1472 Ford?

Review the 'Possible Causes' mentioned above and visually examine the corresponding wiring harness and connectors. Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.

Search for B1472 Ford Questions and Answers: Search here →

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1472 Ford code, it typically requires 1.0 hour of labor. The specific diagnosis time and labor rates at auto repair shops can differ based on factors such as the location, make and model of the vehicle, and even the engine type. It is common for most auto repair shops to charge between $75 and $150 per hour.

What are Code Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

Code B1472 Ford Description

The Smart Junction Box (SJB) sends reference signals to the headlamp switch through circuits. When the headlamp switch is placed in the HEADLAMPS ON position, the voltage signal is routed to ground through the circuit. If the SJB detects a fault with the headlamp switch inputs, the SJB turns the exterior lamps on by default. When the SJB detects the headlamp switch in the HEADLAMPS ON position and the multifunction switch in the LOW BEAM position, the SJB sends voltage through circuits to the low beam headlamps. When the SJB detects the headlamp switch in the HEADLAMPS ON position and the multifunction switch in the HIGH BEAM position, the SJB sends voltage through circuits to the high beam headlamps. The SJB sends a reference signal to the multifunction switch through circuits CLF27 (GN/BN) and CLF17 (WH/OG). When the multifunction switch is placed in the FLASH-TO-PASS or HIGH BEAM position, the voltage signal is routed to ground. When the SJB detects a request for the flash-to-pass, the SJB sends voltage to the high beam headlamps. The OBDII codes when the SJB detects a short to ground from the headlamps on request circuit or no input from the headlamp switch.

OBDII Code B1472 Ford - Lamp Headlamp Input Circuit Short To Ground - AutoCodes.com
B1472 Ford Code - Lamp Headlamp Input Circuit Short To Ground

Need More Information on the Code?

Need more information on how to fix the B1472 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1472 Ford code diagnosed by a professional: Find a repair shop in your area

Code B1472 Ford comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the B1472 Ford code? Have you replaced any parts?
Any information is appreciated. Thanks