B1403 - Driver Power Window Up Switch Circuit Failure
B1403 Possible Causes
- Driver Power Window Regulator Electric Motor
- Faulty Master Window Regulator Control Switch
- Faulty Front Electronics Module (FEM)
- Master Window Regulator Control Switch harness is open or shorted
- Master Window Regulator Control Switch circuit poor electrical connection
How do I fix code B1403
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the B1403 code
Labor: 1.0The cost of diagnosing the B1403 code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
B1403 Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B1403 DescriptionThe driver power window is controlled by the Front Electronics Module (FEM). The driver power window regulator control switch and motor are hardwired directly to the FEM. The FEM will read the window regulator control switch actuation and provide the corresponding output to the window motor. If one-touch operation is selected, the FEM powers the driver window motor for seven seconds or until the FEM senses the motor is stalled. If the window track, regulator or glass weatherstrips cause the glass to bind, the FEM may interpret this as a motor stalled condition and halt motor operation.
B1403 More InformationNeed more information on how to fix the B1403 code?
Get Access to Factory Service Manuals
B1403 Information for specific makes
Need more help?Get the B1403 code diagnosed by a professional: Find a repair shop in your area
B1403 CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the B1403 code? Have you replaced any parts?
Any information is appreciated. Thanks