B129E Code - Left Blind Spot Sensor Alignment Or Adjustment Incorrect
Quick Answer
The Blind Spot Module (BSM) monitors the Left Blind Spot Sensor (LBSS). Common causes include Left Blind Spot Sensor Bracket Damager or Misaligned, Faulty Left Blind Spot Sensor, Left Blind Spot Sensor harness is open or shorted. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- B129E indicates Left Blind Spot Sensor Alignment Or Adjustment Incorrect.
- Common causes
- Common causes include Left Blind Spot Sensor Bracket Damager or Misaligned, Faulty Left Blind Spot Sensor, Left Blind Spot Sensor harness is open or shorted.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code B129E Description
What are the Possible Causes of the DTC B129E?
- Left Blind Spot Sensor Bracket Damager or Misaligned
- Faulty Left Blind Spot Sensor
- Left Blind Spot Sensor harness is open or shorted
- Left Blind Spot Sensor circuit poor electrical connection
How to Fix the DTC B129E?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B129E code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B129E code?
Need more information on how to fix the B129E code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B129E code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B129E Chrysler — Left Blind Spot Sensor Alignment Or Adjustment Incorrect
- B129E Dodge — Left Blind Spot Sensor Alignment Or Adjustment Incorrect
- B129E Ford — Enable/Disable Switch Semiautomatic Advanced Parallel Park Actuator Stuck Closed
- B129E Jeep — Left Blind Spot Sensor Alignment Or Adjustment Incorrect
- B129E Lincoln — Enable/Disable Switch Semiautomatic Advanced Parallel Park Actuator Stuck Closed
- B129E Mercury — Enable/Disable Switch Semiautomatic Advanced Parallel Park Actuator Stuck Closed
- B129E RAM — Left Blind Spot Sensor Alignment Or Adjustment Incorrect
Frequently Asked Questions about B129E Code
1. What are the common symptoms of OBDII code B129E - Left Blind Spot Sensor Alignment Or Adjustment Incorrect?
The common symptoms include the malfunction indicator light (MIL) being illuminated on the dashboard and a message indicating a fault with the left blind spot sensor.
2. What could be the possible causes of OBDII code B129E?
The code B129E may be triggered due to misalignment or incorrect adjustment of the left blind spot sensor, wiring issues, or sensor damage.
3. How can I diagnose the cause of OBDII code B129E?
Diagnosing the cause of code B129E involves visually inspecting the left blind spot sensor, checking the wiring for any damage or loose connections, and ensuring proper alignment of the sensor.
4. Can I fix OBDII code B129E at home?
While some DIY enthusiasts may attempt to realign the left blind spot sensor, it is recommended to seek professional help to ensure proper adjustment and avoid causing further damage.
5. Is it safe to drive with OBDII code B129E active?
It is generally safe to drive with code B129E, but it is advisable to address the issue promptly to ensure the proper functioning of the blind spot monitoring system.
6. How much does it typically cost to repair OBDII code B129E?
The cost of repairing code B129E can vary depending on the underlying cause. It is recommended to consult a professional mechanic for an accurate diagnosis and cost estimate.
7. Can OBDII code B129E affect other vehicle systems?
While code B129E specifically relates to the left blind spot sensor, it is essential to address the issue promptly to prevent any potential impact on the overall safety features of the vehicle.
8. Are there any preventive measures to avoid triggering OBDII code B129E?
Regularly inspecting the blind spot sensors and ensuring they are clean and properly aligned can help prevent the misalignment or adjustment issues that may trigger code B129E.
9. How long does it typically take to repair OBDII code B129E?
The repair time for code B129E can vary depending on the exact cause and the complexity of the adjustment or repair needed. A professional mechanic can provide a more accurate timeframe.
10. Can extreme weather conditions trigger OBDII code B129E?
Extreme weather conditions, such as severe temperature changes or exposure to harsh elements, can potentially impact the alignment or adjustment of the blind spot sensor and lead to the activation of code B129E. Regular maintenance and inspection can help mitigate these issues.
Discuss the causes and fixes for B129E OBDII Code
Code B129E comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
