B129E Chrysler Code - Left Blind Spot Sensor Alignment Or Adjustment Incorrect
Quick Answer
The Blind Spot Module (BSM) monitors the Left Blind Spot Sensor (LBSS). Common causes include Left Blind Spot Sensor Bracket Damager or Misaligned, Faulty Left Blind Spot Sensor, Left Blind Spot Sensor harness is open or shorted. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- B129E Chrysler indicates Left Blind Spot Sensor Alignment Or Adjustment Incorrect.
- Common causes
- Common causes include Left Blind Spot Sensor Bracket Damager or Misaligned, Faulty Left Blind Spot Sensor, Left Blind Spot Sensor harness is open or shorted.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code B129E Chrysler Description
What are the Possible Causes of the DTC B129E Chrysler?
- Left Blind Spot Sensor Bracket Damager or Misaligned
- Faulty Left Blind Spot Sensor
- Left Blind Spot Sensor harness is open or shorted
- Left Blind Spot Sensor circuit poor electrical connection
How to Fix the DTC B129E Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B129E Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B129E Chrysler code?
Need more information on how to fix the B129E Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B129E Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B129E Chrysler Code
1. What are the common symptoms of OBDII code B129E in a Chrysler related to the Left Blind Spot Sensor Alignment Or Adjustment Incorrect?
- The most common symptom is the malfunction indicator light (MIL) illuminating on the dashboard.
2. What can cause the OBDII code B129E in a Chrysler indicating Left Blind Spot Sensor Alignment Or Adjustment Incorrect?
- The code is typically triggered when the left blind spot sensor is not properly aligned or calibrated.
3. How can I fix the OBDII code B129E in my Chrysler due to Left Blind Spot Sensor Alignment Or Adjustment Incorrect?
- To resolve this issue, you may need to realign or recalibrate the left blind spot sensor using the manufacturer's recommended procedures.
4. Can weather or external factors trigger OBDII code B129E in a Chrysler for Left Blind Spot Sensor Alignment Or Adjustment Incorrect?
- Yes, extreme weather conditions or physical damage to the sensor can also cause misalignment triggering the code.
5. Is it possible to reset the OBDII code B129E in a Chrysler related to Left Blind Spot Sensor Alignment Or Adjustment Incorrect without any repair?
- It is not recommended to simply reset the code without addressing the underlying issue, as it may lead to recurring problems.
6. Do I need special tools to fix the OBDII code B129E in a Chrysler indicating Left Blind Spot Sensor Alignment Or Adjustment Incorrect?
- It is advisable to use specialized diagnostic tools and equipment to properly realign or adjust the blind spot sensor.
7. Can I perform the repair for OBDII code B129E in my Chrysler at home, or should I seek professional help?
- While some DIY enthusiasts may attempt the repair, it is recommended to consult a qualified technician for accurate diagnosis and repair.
8. How crucial is it to address the OBDII code B129E in a Chrysler related to Left Blind Spot Sensor Alignment Or Adjustment Incorrect promptly?
- It is important to resolve the issue promptly to ensure the proper functioning of the blind spot monitoring system for enhanced safety.
9. Will ignoring the OBDII code B129E in a Chrysler indicating Left Blind Spot Sensor Alignment Or Adjustment Incorrect affect other vehicle systems?
- Ignoring the code may impact the accuracy of the blind spot monitoring system and compromise overall safety while driving.
10. Are there any preventive measures to avoid triggering the OBDII code B129E in a Chrysler due to Left Blind Spot Sensor Alignment Or Adjustment Incorrect?
- Regular maintenance checks and prompt repairs of any sensor-related issues can help prevent the recurrence of this code.
Discuss the causes and fixes for B129E Chrysler OBDII Code
Code B129E Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
