B129A Code - LIN Bus D Signal Invalid
Quick Answer
The Body Control Module (BCM) monitors the Central Lock Switch Illumination Circuit. Common causes include Faulty Driver Side Windshield Wiper Motor, Driver Side Windshield Wiper Motor harness is open or shorted, Driver Side Windshield Wiper Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B129A indicates LIN Bus D Signal Invalid.
- Common causes
- Common causes include Faulty Driver Side Windshield Wiper Motor, Driver Side Windshield Wiper Motor harness is open or shorted, Driver Side Windshield Wiper Motor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B129A Description
What are the Possible Causes of the DTC B129A?
- Faulty Driver Side Windshield Wiper Motor
- Driver Side Windshield Wiper Motor harness is open or shorted
- Driver Side Windshield Wiper Motor circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B129A?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B129A code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B129A code?
Need more information on how to fix the B129A code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B129A code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B129A Ford — LIN Bus D Signal Invalid
- B129A Lincoln — LIN Bus D Signal Invalid
- B129A Mercury — LIN Bus D Signal Invalid
Frequently Asked Questions about B129A Code
1. What are common symptoms of OBDII code B129A (LIN Bus D Signal Invalid)?
The common symptoms of code B129A may include issues with the vehicle's infotainment system, navigation system, or other related electronics.
2. What could cause the OBDII code B129A to occur?
The code B129A, LIN Bus D Signal Invalid, is typically triggered by a communication error in the LIN bus network, which connects various modules in the vehicle.
3. How can I diagnose the OBDII code B129A?
Diagnosing the B129A code usually involves using a diagnostic scanner to analyze the communication between modules on the LIN bus network and identify the source of the signal invalidity.
4. Are there any DIY repair tips for fixing the LIN Bus D Signal Invalid issue?
DIY repair tips for resolving the B129A code may include checking the connections and wiring in the LIN bus network, ensuring all modules are properly communicating, and resetting the system if necessary.
5. Can a faulty module cause the B129A code to appear?
Yes, a faulty module in the LIN bus network, such as a navigation unit or multimedia module, can potentially trigger the B129A code due to communication issues.
6. Is it safe to continue driving with the OBDII code B129A present?
While the B129A code may not directly affect the drivability of the vehicle, it is recommended to address the issue promptly to prevent any potential malfunctions in the vehicle's electronic systems.
7. How much does it typically cost to repair the LIN Bus D Signal Invalid problem?
The cost of repairing the B129A code can vary depending on the underlying cause. It may involve simple troubleshooting and resetting procedures, or more complex repairs like module replacements, which can be more expensive.
8. Can a low battery voltage trigger the B129A code?
Yes, low battery voltage or electrical issues in the vehicle can sometimes disrupt the communication on the LIN bus network and lead to the B129A code being triggered.
9. Will resetting the OBDII code B129A make it go away permanently?
Resetting the B129A code may temporarily clear the error, but if the underlying issue causing the communication error on the LIN bus network is not resolved, the code is likely to reappear.
10. How important is it to address the OBDII code B129A promptly?
Addressing the B129A code promptly is important to ensure the proper functioning of the vehicle's electronic systems and prevent potential malfunctions that could impact the driving experience.
Discuss the causes and fixes for B129A OBDII Code
Code B129A comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
