Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
The cost of diagnosing the B1264 code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Under normal operation, the panel/defrost and floor door actuator motors are supplied voltage or ground through the circuit, depending on desired actuator rotation, by the Electronic Automatic Temperature Control (EATC) module. The EATC module then supplies the appropriate voltage or ground to the other side of the actuator motor. The panel/defrost and floor door actuator feedback resistors are supplied a ground and a 5-volt reference voltage from the EATC module. The EATC module reads the voltage on the circuit to determine the actuator position by the position of the actuator feedback resistor wiper arm.
Need more information on how to fix the B1264 code? Get Access to Factory Service Manuals
Get the B1264 code diagnosed by a professional: Find a repair shop in your area
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the B1264 code? Have you replaced any parts?
Any information is appreciated. Thanks