B1264 GMC - Floor Door Actuator Failure
B1264 GMC Possible Causes
- Faulty Floor Door Actuator
- Floor Door Actuator harness is open or shorted
- Floor Door Actuator circuit poor electrical connection
- Faulty Electronic Automatic Temperature Control (EATC) Module
How do I fix code B1264 GMC?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the B1264 GMC code
Labor: 1.0The cost of diagnosing the B1264 GMC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
B1264 Gmc DescriptionUnder normal operation, the panel/defrost and floor door actuator motors are supplied voltage or ground through the circuit, depending on desired actuator rotation, by the Electronic Automatic Temperature Control (EATC) module. The EATC module then supplies the appropriate voltage or ground to the other side of the actuator motor. The panel/defrost and floor door actuator feedback resistors are supplied a ground and a 5-volt reference voltage from the EATC module. The EATC module reads the voltage on the circuit to determine the actuator position by the position of the actuator feedback resistor wiper arm.
B1264 GMC More InformationNeed more information on how to fix the B1264 GMC code?
Get Access to Factory Service Manuals
Need more help?Get the B1264 Gmc code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the B1264 Gmc code? Have you replaced any parts?
Any information is appreciated. Thanks