B1123 Code - Diagnosis Sensor Unit
Quick Answer
The Air Bag Diagnosis Sensor Unit detects the whole SRS electrical system and displays the malfunction either by illuminating or blinking the air bag warning lamp in the combination meter. Common causes include Faulty Diagnosis Sensor Unit, Diagnosis Sensor Unit harness is open or shorted, Diagnosis Sensor Unit circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1123 indicates Diagnosis Sensor Unit.
- Common causes
- Common causes include Faulty Diagnosis Sensor Unit, Diagnosis Sensor Unit harness is open or shorted, Diagnosis Sensor Unit circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1123 Description
The Air Bag Diagnosis Sensor Unit contains the “G†sensors for both frontal and side collisions and spare battery function in case of main battery damaged in a collision.
What are the Possible Causes of the DTC B1123?
- Faulty Diagnosis Sensor Unit
- Diagnosis Sensor Unit harness is open or shorted
- Diagnosis Sensor Unit circuit poor electrical connection
How to Fix the DTC B1123?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1123 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1123 code?
Need more information on how to fix the B1123 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1123 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B1123 Ford — Restraints Ignition Relay
- B1123 Infiniti — Diagnosis Sensor Unit
- B1123 Lexus — Occupant Classification System Malfunction
- B1123 Lincoln — Restraints Ignition Relay
- B1123 Mercury — Restraints Ignition Relay
- B1123 Nissan — Diagnosis Sensor Unit
- B1123 Scion — Occupant Classification System Malfunction
- B1123 Toyota — Occupant Classification System Malfunction
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1123 Code
1. What are the common symptoms of OBDII code B1123 (Diagnosis Sensor Unit)?
- Common symptoms include the malfunction indicator light (MIL) turning on, poor engine performance, and issues with the vehicle's transmission.
2. What causes OBDII code B1123 to be triggered?
- This code is typically triggered by a faulty diagnosis sensor unit or a wiring issue related to the sensor unit.
3. How serious is OBDII code B1123 (Diagnosis Sensor Unit)?
- This code can lead to engine performance issues and potentially affect the transmission. It is important to address this issue promptly.
4. Can I continue driving with OBDII code B1123 active?
- It is not recommended to continue driving with this code active, as it can lead to further damage to the vehicle.
5. How can I diagnose OBDII code B1123 at home?
- You can diagnose this code using an OBDII scanner to read the fault codes stored in the vehicle's computer system.
6. What are some repair tips for fixing OBDII code B1123?
- Repair tips may include checking the diagnosis sensor unit for proper functioning, inspecting the wiring for any damage, and replacing the sensor unit if necessary.
7. Can a DIY enthusiast fix OBDII code B1123 themselves?
- Depending on your level of experience and access to tools, it may be possible to fix this issue yourself. However, consulting a professional is recommended for accurate diagnosis and repair.
8. How much does it typically cost to repair OBDII code B1123?
- The cost of repairing this code can vary depending on the cause of the issue, the cost of parts, and labor rates in your area. It is best to obtain quotes from local automotive repair shops.
9. Will resetting the OBDII code B1123 make it go away permanently?
- Resetting the code may temporarily turn off the MIL light, but if the underlying issue is not addressed, the code is likely to reappear.
10. Is OBDII code B1123 specific to a certain make or model of vehicle?
- OBDII code B1123 can be found in various makes and models of vehicles equipped with OBDII systems.
Discuss the causes and fixes for B1123 OBDII Code
Code B1123 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
