B1082 Code - Front Pre-Tensioner Right Short
Quick Answer
In the case of a frontal collision that exceeds specified impact level, the diagnosis sensor unit detects the deceleration caused by the collision. Common causes include Faulty Front Pre-Tensioner Right, Front Pre-Tensioner Right harness is open or shorted, Front Pre-Tensioner Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1082 indicates Front Pre-Tensioner Right Short.
- Common causes
- Common causes include Faulty Front Pre-Tensioner Right, Front Pre-Tensioner Right harness is open or shorted, Front Pre-Tensioner Right circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1082 Description
The restraint system for front seat occupant consists of the pre-tensioner mechanism and load limiter mechanism.
What are the Possible Causes of the DTC B1082?
- Faulty Front Pre-Tensioner Right
- Front Pre-Tensioner Right harness is open or shorted
- Front Pre-Tensioner Right circuit poor electrical connection
How to Fix the DTC B1082?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1082 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1082 code?
Need more information on how to fix the B1082 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1082 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B1082 Ford — Right Temperature Damper Motor Circuit
- B1082 Infiniti — Front Pre-Tensioner Right Short
- B1082 Lincoln — Right Temperature Damper Motor Circuit
- B1082 Mercury — Right Temperature Damper Motor Circuit
- B1082 Nissan — Front Pre-Tensioner Right Short
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1082 Code
1. What are the common symptoms of OBDII code B1082 (Front Pre-Tensioner Right Short)?
- The common symptoms include the airbag warning light illuminating on the dashboard and a possible non-deployment of the right front pre-tensioner in the event of a collision.
2. What are the possible causes of OBDII code B1082?
- The code B1082 typically indicates a short circuit in the wiring of the right front pre-tensioner or a fault within the pre-tensioner itself.
3. How serious is OBDII code B1082?
- OBDII code B1082 is a serious issue as it relates to the right front pre-tensioner, which is a crucial safety component designed to activate during a collision to restrain the occupant.
4. Can I continue driving with OBDII code B1082?
- It is not recommended to continue driving with OBDII code B1082 unresolved, as it may compromise the effectiveness of the right front pre-tensioner in case of an accident.
5. How can I diagnose OBDII code B1082?
- To diagnose OBDII code B1082, a professional mechanic would typically use a scan tool to retrieve the code and then inspect the wiring and connections related to the right front pre-tensioner for any faults.
6. What is the typical repair for OBDII code B1082?
- The typical repair for OBDII code B1082 involves repairing or replacing the wiring harness or the right front pre-tensioner, depending on where the fault is located.
7. Can I reset OBDII code B1082 on my own?
- While you can clear the code using an OBDII scanner, it is important to address the root cause of the issue to prevent the code from reappearing.
8. Are there any safety precautions I should take if OBDII code B1082 is present?
- If OBDII code B1082 is present, it is advisable to have the vehicle inspected by a professional to ensure that the right front pre-tensioner system is functioning properly for your safety.
9. How much does it cost to fix OBDII code B1082?
- The cost of fixing OBDII code B1082 can vary depending on the extent of the damage and the specific repairs needed, so it is best to consult a mechanic for an accurate estimate.
10. Can OBDII code B1082 affect other vehicle systems?
- OBDII code B1082 is specific to the right front pre-tensioner system and may not directly impact other vehicle systems, but it is crucial for overall safety in the event of a collision.
Discuss the causes and fixes for B1082 OBDII Code
Code B1082 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
