AutoCodes – Generic – B1060

B1060 Code - Air Bag Sensor Unit

Quick Answer

Detects the whole SRS electrical system and displays the malfunction either by illuminating or blinking the airbag warning lamp in the combination meter. Common causes include Faulty Air Bag Sensor Unit (Air Bag Control Module), Air Bag Sensor Unit (Air Bag Control Module) harness is open or shorted, Air Bag Sensor Unit (Air Bag Control Module) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1060 indicates Air Bag Sensor Unit.
Common causes: Common causes include Faulty Air Bag Sensor Unit (Air Bag Control Module), Air Bag Sensor Unit (Air Bag Control Module) harness is open or shorted, Air Bag Sensor Unit (Air Bag Control Module) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 6,903

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 11, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1060 Description

Detects the whole SRS electrical system and displays the malfunction either by illuminating or blinking the airbag warning lamp in the combination meter. Malfunctioning part can be detected by the on-board self-diagnosis system. It detects a shock that exceeds specified level and monitors such systems as the driver and passenger airbag, side airbag, curtain airbag, pre-tensioner seat belts and Occupant Classification System (OCS) operate properly. It contains the G sensors for both frontal and side collisions and spare battery function in case of main battery damage in the collision. The OBDII code sets when the airbag diagnosis sensor unit is out of order or mismatch

OBDII Code B1060 - Air Bag Sensor Unit - AutoCodes.com — B1060 Code - Air Bag Sensor Unit

What does this mean?

What are the Possible Causes of the DTC B1060?

Faulty Air Bag Sensor Unit (Air Bag Control Module)
Air Bag Sensor Unit (Air Bag Control Module) harness is open or shorted
Air Bag Sensor Unit (Air Bag Control Module) circuit poor electrical connection

How to Fix the DTC B1060?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1060 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1060 code?

Need more information on how to fix the B1060 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1060 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B1060 Acura — Relay Control Module Lost Communication With Gauge Control Module
B1060 Honda — Relay Control Module Lost Communication With Gauge Control Module
B1060 Infiniti — Air Bag Sensor Unit
B1060 Nissan — Air Bag Sensor Unit

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1060 Code

1. What are common symptoms of OBDII code B1060 related to the Air Bag Sensor Unit?

- Common symptoms include the airbag warning light staying illuminated on the dashboard and potential issues with the airbag system's functionality.

2. What are some possible causes of OBDII code B1060 related to the Air Bag Sensor Unit?

- Possible causes include a faulty airbag sensor unit, damaged wiring or connectors, or issues with the airbag control module.

3. How can I diagnose OBDII code B1060 for the Air Bag Sensor Unit?

- Diagnosing this code typically involves using a professional OBDII scanner to read the specific fault codes related to the airbag system and performing a visual inspection of the sensor unit and related components.

4. Can I drive my vehicle with OBDII code B1060 related to the Air Bag Sensor Unit?

- It is not recommended to drive the vehicle with the airbag warning light on, as it indicates potential issues with the airbag system's functionality and safety.

5. How can I repair OBDII code B1060 for the Air Bag Sensor Unit?

- Repairing this code may involve replacing the faulty airbag sensor unit, repairing damaged wiring or connectors, or resetting the airbag system using a diagnostic tool.

6. Are there any safety precautions to consider when dealing with OBDII code B1060 and the Air Bag Sensor Unit?

- When working on the airbag system, it is crucial to disconnect the vehicle's battery and wait for at least 10-15 minutes to discharge any stored energy to avoid accidental airbag deployment.

7. Can resetting the OBDII code B1060 related to the Air Bag Sensor Unit fix the issue?

- Resetting the code may temporarily turn off the warning light, but if the underlying issue with the airbag sensor unit is not addressed, the code is likely to reappear.

8. How much does it cost to repair OBDII code B1060 for the Air Bag Sensor Unit?

- The cost of repairing this code can vary depending on the specific cause of the issue, with potential costs including parts and labor for replacing the sensor unit or repairing wiring.

9. Can I reset OBDII code B1060 related to the Air Bag Sensor Unit without professional help?

- While it is possible to reset the code using an OBDII scanner or by disconnecting the battery, it is recommended to seek professional assistance to diagnose and repair the underlying issue properly.

10. Will OBDII code B1060 cause my airbags to not deploy in case of an accident?

- If left unresolved, OBDII code B1060 may affect the proper functioning of the airbag system, potentially leading to the airbags not deploying as intended in the event of a collision.