| All About OBDII Engine Codes
AutoCodes - Infiniti - B1060 INFINITI

B1060 INFINITI Code - Air Bag Sensor Unit

- Code Popularity: 502 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents
By - Updated Feb 11, 2019
Share on Facebook   Share on Twitter   Share on Linkedin

|B1060 INFINITI code possible causes

  • Faulty Air Bag Sensor Unit (Air Bag Control Module)
  • Air Bag Sensor Unit (Air Bag Control Module) harness is open or shorted
  • Air Bag Sensor Unit (Air Bag Control Module) circuit poor electrical connection

|How do I fix code B1060 INFINITI code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Does your car have Safety Recalls? → Check here

|Cost of diagnosing B1060 INFINITI code

Labor: 1.0

The cost of diagnosing the B1060 INFINITI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

|What are B1060 INFINITI code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|B1060 INFINITI code description

Detects the whole SRS electrical system and displays the malfunction either by illuminating or blinking the airbag warning lamp in the combination meter. Malfunctioning part can be detected by the on-board self-diagnosis system. It detects a shock that exceeds specified level and monitors such systems as the driver and passenger airbag, side airbag, curtain airbag, pre-tensioner seat belts and Occupant Classification System (OCS) operate properly. It contains the G sensors for both frontal and side collisions and spare battery function in case of main battery damage in the collision. The OBDII code sets when the airbag diagnosis sensor unit is out of order or mismatch

OBDII Code b1060 infiniti - Air Bag Sensor Unit -
B1060 INFINITI Code - Air Bag Sensor Unit

|Need more information with the B1060 INFINITI code?

Need more information on how to fix the B1060 INFINITI code? Get Access to Factory Service Manuals

|Need help with a B1060 INFINITI code?

Get the b1060 infiniti code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

|B1060 INFINITI code comments

Help us improve Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the b1060 infiniti code? Have you replaced any parts?
Any information is appreciated. Thanks