Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
The cost of diagnosing the B1037 code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
The main G sensor generates a signal voltage when it detects deceleration beyond the specified level caused by a vehicle frontal collision. When the airbag diagnosis sensor unit defines both the signal voltage of the G sensor and the safing algorithm to be that of a collision that exceeds a specified level, the driving circuit switches on and feeds the electric ignitor of both driver and passenger airbags and pre-tensioner seat belts. The Diagnostic Trouble Code (DTC) will set the Crash Zone Sensor 1 is malfunctioning.
Need more information on how to fix the B1037 code? Get Access to Factory Service Manuals
Get the b1037 code diagnosed by a professional: Find a repair shop in your area
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the b1037 code? Have you replaced any parts?
Any information is appreciated. Thanks