B1037 NISSAN - Crash Zone Sensor 1
B1037 NISSAN Possible Causes
- Faulty Crash Zone Sensor 1
- Crash Zone Sensor 1 harness is open or shorted
- Crash Zone Sensor 1 circuit poor electrical connection
- Faulty Airbag Diagnosis Sensor Unit (Air Bag Control Module)
How do I fix code B1037 NISSAN?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
How much do you know about cars?
Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge
Cost of diagnosing the B1037 NISSAN code
Labor: 1.0The cost of diagnosing the B1037 NISSAN code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
- Air Bag Warning Light ON
B1037 NISSAN DescriptionThe main G sensor generates a signal voltage when it detects deceleration beyond the specified level caused by a vehicle frontal collision. When the airbag diagnosis sensor unit defines both the signal voltage of the G sensor and the safing algorithm to be that of a collision that exceeds a specified level, the driving circuit switches on and feeds the electric ignitor of both driver and passenger airbags and pre-tensioner seat belts. The Diagnostic Trouble Code (DTC) will set the Crash Zone Sensor 1 is malfunctioning.
More InformationNeed more information on how to fix the B1037 NISSAN code?
Get Access to Factory Service Manuals
Need more help?Get the B1037 Nissan code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the B1037 Nissan code? Have you replaced any parts?
Any information is appreciated. Thanks