Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
The cost of diagnosing the U3017 Chrysler code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
The Powertrain Control Module (PCM) determines that the ignition off time received from the Body Control Module (BCM) is either too high or too low compared to a calculated value. The PCM also factors in the coolant temperature drop observed over a key cycle during this monitor.
The Diagnostic Trouble Code (DTC) will set when the BCM engine ignition off time is too high or low for the coolant temperature drop observed over the key cycle. The PCM will light the MIL lamp after this monitor runs and fails twice. The PCM will turn off the MIL lamp once the diagnostic runs and passes in four consecutive drive cycles. Note: This DTC can also set when using the scan tool to change the vehicle from Shipping Mode to Customer Mode (during New Vehicle Prep).
Need more information on how to fix the U3017 Chrysler code? Get Access to Factory Service Manuals
Get the U3017 Chrysler code diagnosed by a professional: Find a repair shop in your area
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the U3017 Chrysler code? Have you replaced any parts?
Any information is appreciated. Thanks