U3007 Code - Control Module Supply Circuit 2
Quick Answer
The vehicle control modules or sensors monitor the system voltage to verify the system voltage is within the normal operating range. Common causes include Faulty Control Module setting the code, Control Module harness is open or shorted, Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U3007 indicates Control Module Supply Circuit 2.
- Common causes
- Common causes include Faulty Control Module setting the code, Control Module harness is open or shorted, Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U3007 Description
What are the Possible Causes of the DTC U3007?
- Faulty Control Module setting the code
- Control Module harness is open or shorted
- Control Module circuit poor electrical connection
How to Fix the DTC U3007?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U3007 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U3007 code?
Need more information on how to fix the U3007 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U3007 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- U3007 Buick — Control Module Supply Circuit 2
- U3007 Cadillac — Control Module Supply Circuit 2
- U3007 Chevrolet — Control Module Supply Circuit 2
- U3007 GMC — Control Module Supply Circuit 2
Frequently Asked Questions about U3007 Code
1. What are common symptoms of OBDII code U3007 (Control Module Supply Circuit 2)?
The common symptoms of OBDII code U3007 may include issues such as intermittent or constant loss of power, rough idling, engine stalling, and difficulty starting the vehicle.
2. What are the possible causes of OBDII code U3007?
Possible causes of OBDII code U3007 (Control Module Supply Circuit 2) may include a faulty control module, damaged wiring or connectors in the circuit, a weak battery, or a malfunctioning alternator.
3. How can I diagnose OBDII code U3007?
To diagnose OBDII code U3007, you can use a diagnostic scanner to retrieve the code and further investigate the control module supply circuit 2. Check the wiring, connectors, control module, battery, and alternator for any signs of damage or malfunction.
4. Can a weak battery cause OBDII code U3007 to appear?
Yes, a weak battery can cause OBDII code U3007 to appear as it may not be providing sufficient power to the control module supply circuit 2, leading to issues with the vehicle's performance.
5. What are some repair tips for fixing OBDII code U3007?
Repair tips for fixing OBDII code U3007 may include checking and repairing any damaged wiring or connectors in the control module supply circuit 2, testing and replacing a weak battery, and ensuring the alternator is functioning properly.
6. Is it safe to continue driving with OBDII code U3007 present?
It is not recommended to continue driving with OBDII code U3007 present, as it can lead to further damage to the vehicle and potentially cause safety hazards due to erratic engine performance.
7. Can OBDII code U3007 be a false alarm?
While it is possible for OBDII code U3007 to be triggered by a temporary issue or momentary fault, it is important to diagnose and address the underlying cause to prevent any potential problems with the vehicle's control module supply circuit 2.
8. How much does it typically cost to repair OBDII code U3007?
The cost to repair OBDII code U3007 can vary depending on the specific cause of the issue. Repair costs may range from a simple fix like replacing a faulty connector to a more complex repair involving the control module or alternator.
9. Can a DIY enthusiast fix OBDII code U3007, or is professional help required?
DIY enthusiasts with automotive repair knowledge and experience may be able to address OBDII code U3007 by following diagnostic procedures and repair tips. However, in cases where the issue is complex or involves specialized tools, professional help may be required.
10. How urgent is it to address OBDII code U3007 once it appears?
It is advisable to address OBDII code U3007 promptly once it appears to prevent further damage to the vehicle and ensure optimal performance. Ignoring the code can lead to more severe issues and potentially costly repairs in the future.
Discuss the causes and fixes for U3007 OBDII Code
Code U3007 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
