AutoCodes - Chevrolet - U2625 CHEVROLET

U2625 CHEVROLET Code - Battery Energy Control Module Lost Communication With Hybrid/EV Battery Interface Control Module 13

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3
Table of contents

|U2625 CHEVROLET code possible causes

  • Faulty Hybrid/EV Battery Interface Control Module 13
  • Hybrid/EV Battery Interface Control Module 13 harness is open or shorted
  • Hybrid/EV Battery Interface Control Module 13 circuit poor electrical connection
  • Faulty Battery Energy Control Module

|How do I fix the U2625 CHEVROLET code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|Cost of diagnosing the U2625 CHEVROLET code

Labor: 1.0

The cost of diagnosing the U2625 CHEVROLET code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|What are U2625 CHEVROLET code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|U2625 CHEVROLET code description

Devices connected to the serial data circuits monitor for serial data communications during normal vehicle operation. Operating information and commands are exchanged among the devices. The devices have prerecorded information about what messages are needed to be exchanged on the serial data circuits, for each virtual network. The messages are supervised and also, some periodic messages are used by the receiver device as an availability indication of the transmitter device. Each message contains the identification number of the transmitter device.
The scan tool does not communicate the Hybrid/EV Battery Interface Control Modules 13 on Battery Energy Control Module dedicated bus.
The Diagnostic Trouble Code (DTC) will set when there is no temperature report message from Hybrid/EV Battery Interface Control Modules 13 to Battery Energy Control Module within 4s.
OBDII Code U2625 Chevrolet - Battery Energy Control Module Lost Communication With Hybrid/EV Battery Interface Control Module 13 - AutoCodes.com

|Need more information with the U2625 CHEVROLET code?

Need more information on how to fix the U2625 CHEVROLET code?
Get Access to Factory Service Manuals

|Need help with a U2625 CHEVROLET code?

Get the U2625 Chevrolet code diagnosed by a professional: Find a repair shop in your area

|U2625 CHEVROLET code comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the U2625 Chevrolet code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧
Repair Importance Level: 3
 
1=Low 2=Medium 3=High What is this?
Repair Difficulty Level: 3
 
1=Easy 2=Moderate 3=Hard What is this?