U2616 2018 GMC Sierra Code - Fuel Pump Driver Control Module Lost Communication With ECM
Quick Answer
Devices connected to the serial data circuits monitor for serial data communications during normal vehicle operation. Common causes include Faulty Engine Control Module (ECM), Engine Control Module harness is open or shorted, Engine Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U2616 2018 GMC Sierra indicates Fuel Pump Driver Control Module Lost Communication With ECM.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Engine Control Module harness is open or shorted, Engine Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U2616 2018 GMC Sierra Description
What are the Possible Causes of the DTC U2616 2018 GMC Sierra?
- Faulty Engine Control Module (ECM)
- Engine Control Module harness is open or shorted
- Engine Control Module circuit poor electrical connection
- Faulty Fuel Pump Driver Control Module
How to Fix the DTC U2616 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U2616 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U2616 2018 GMC Sierra code?
Need more information on how to fix the U2616 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U2616 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U2616 2018 GMC Sierra Code
1. What are the common symptoms of OBDII code U2616 in a 2018 GMC Sierra indicating Fuel Pump Driver Control Module Lost Communication With ECM?
The common symptoms include engine stalling, rough idling, difficulty starting the vehicle, and possibly a check engine light illuminated on the dashboard.
2. What are the possible causes of OBDII code U2616 in a 2018 GMC Sierra?
The code U2616 usually indicates a communication error between the Fuel Pump Driver Control Module and the Engine Control Module (ECM). Possible causes include wiring issues, a faulty module, or a malfunction in the ECM.
3. How can I diagnose the issue related to OBDII code U2616 in my 2018 GMC Sierra?
Diagnosing the problem requires checking the wiring connections between the fuel pump driver control module and the ECM, inspecting for any damaged wires or loose connections, and using a diagnostic tool to scan for trouble codes.
4. Can a DIY enthusiast repair OBDII code U2616 in a 2018 GMC Sierra?
While diagnosing the issue can be done by a skilled DIYer, repairing the communication problem between the modules may require specialized tools and expertise. It is recommended to consult a professional mechanic for proper repair.
5. Is it safe to drive my 2018 GMC Sierra with OBDII code U2616 indicating Fuel Pump Driver Control Module Lost Communication With ECM?
It is not advisable to drive the vehicle with this code present, as it can lead to potential issues with fuel delivery and engine performance. It is recommended to address the problem promptly to avoid further damage.
6. How much does it typically cost to repair OBDII code U2616 in a 2018 GMC Sierra?
The cost of repairing this code can vary depending on the exact cause of the communication failure. It may involve replacing wiring, modules, or reprogramming the ECM, so the cost can range from a few hundred to over a thousand dollars.
7. Can a faulty Fuel Pump Driver Control Module cause OBDII code U2616 in a 2018 GMC Sierra?
Yes, a faulty Fuel Pump Driver Control Module can indeed cause the communication error with the ECM, triggering the U2616 trouble code. In such cases, replacing the module may be necessary to resolve the issue.
8. Are there any preventive measures to avoid encountering OBDII code U2616 in a 2018 GMC Sierra in the future?
Regular vehicle maintenance, including checking the wiring connections and ensuring proper module functionality, can help prevent issues leading to communication errors between modules and triggering the U2616 code.
9. What are the risks of ignoring OBDII code U2616 in a 2018 GMC Sierra?
Ignoring the U2616 code can lead to potential performance issues, increased fuel consumption, and even engine damage if the communication problem between the Fuel Pump Driver Control Module and ECM is not addressed promptly.
10. Can resetting the trouble codes clear OBDII code U2616 in a 2018 GMC Sierra?
Resetting the trouble codes may temporarily clear the U2616 code, but if the underlying issue causing the communication error between the modules is not fixed, the code is likely to reappear. It is crucial to diagnose and repair the problem to prevent its recurrence.
Discuss the causes and fixes for U2616 2018 GMC Sierra OBDII Code
Code U2616 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
