Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
The cost of diagnosing the U2605 BUICK code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Devices connected to the serial data circuits monitor for serial data communications during normal vehicle operation. Operating information and commands are exchanged among the devices. The devices have prerecorded information about what messages are needed to be exchanged on the serial data circuits, for each virtual network. The messages are supervised and also, some periodic messages are used by the receiver device as an availability indication of the transmitter device. Each message contains the identification number of the transmitter device.
The scan tool does not communicate the Hybrid/EV Battery Interface Control Modules 3 on Battery Energy Control Module dedicated bus.
The Diagnostic Trouble Code (DTC) will set when there is no temperature report message from Hybrid/EV Battery Interface Control Modules 3 to Battery Energy Control Module within 4s.
Need more information on how to fix the U2605 BUICK code?
Get Access to Factory Service Manuals
Get the U2605 Buick code diagnosed by a professional: Find a repair shop in your area
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the U2605 Buick code? Have you replaced any parts?
Any information is appreciated. Thanks