AutoCodes – Buick – U250E Buick

U250E Buick Code - Invalid Data Received From Vehicle Dynamic Sensor 1

Quick Answer

Some devices are constantly receiving information from other devices through serial data communication network. Common causes include Faulty Vehicle Dynamic Sensor 1, Vehicle Dynamic Sensor 1 harness is open or shorted, Vehicle Dynamic Sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U250E Buick indicates Invalid Data Received From Vehicle Dynamic Sensor 1.
Common causes: Common causes include Faulty Vehicle Dynamic Sensor 1, Vehicle Dynamic Sensor 1 harness is open or shorted, Vehicle Dynamic Sensor 1 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 471

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 17, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U250E Buick Description

Some devices are constantly receiving information from other devices through serial data communication network. The invalid data code will be set when a receiving device detects a discrepancy in the information it receives from another device causing its integrity to be questioned. The symptom byte listed in the Diagnostic Trouble Code (DTC) Descriptor is for engineering reference only. No external circuit diagnosis is involved. The DTC will set if the Vehicle Dynamic Sensor 1 is not configured properly.

OBDII Code U250E Buick - Invalid Data Received From Vehicle Dynamic Sensor 1 - AutoCodes.com — U250E Buick Code - Invalid Data Received From Vehicle Dynamic Sensor 1

What does this mean?

What are the Possible Causes of the DTC U250E Buick?

Faulty Vehicle Dynamic Sensor 1
Vehicle Dynamic Sensor 1 harness is open or shorted
Vehicle Dynamic Sensor 1 circuit poor electrical connection

How to Fix the DTC U250E Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U250E Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U250E Buick code?

Need more information on how to fix the U250E Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U250E Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U250E Buick Code

1. What are common symptoms of OBDII code U250E in a Buick related to Invalid Data Received From Vehicle Dynamic Sensor 1?

- Common symptoms include issues with the vehicle's stability control system, ABS warning lights, and potential loss of traction control.

2. What are the possible causes of OBDII code U250E in a Buick?

- The code U250E can be triggered by a faulty vehicle dynamic sensor, damaged wiring or connectors, or problems with the stability control module.

3. How can I diagnose the source of OBDII code U250E in my Buick?

- To diagnose the issue, you may need to use a diagnostic scanner to read the code and inspect the vehicle dynamic sensor, wiring, and related components for any visible damage or issues.

4. What steps can I take to repair OBDII code U250E in my Buick?

- Repair steps may involve replacing the faulty vehicle dynamic sensor, repairing damaged wiring or connectors, or reprogramming the stability control module.

5. Can I drive my Buick with OBDII code U250E present?

- It is not recommended to drive the vehicle with the U250E code active, as it may affect the stability and safety systems of the vehicle.

6. How much does it typically cost to repair OBDII code U250E in a Buick?

- The cost of repairing OBDII code U250E can vary depending on the specific issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.

7. Is OBDII code U250E a common issue in Buick vehicles?

- While not extremely common, the U250E code related to Invalid Data Received From Vehicle Dynamic Sensor 1 can occur in Buick vehicles, especially in models equipped with stability control systems.

8. Can a DIY enthusiast repair OBDII code U250E in a Buick?

- Depending on the individual's skill level and access to tools, some DIY enthusiasts may be able to diagnose and repair OBDII code U250E, especially if the issue is with wiring or connectors.

9. Will resetting the OBDII code U250E in my Buick make the problem go away?

- Resetting the code may temporarily clear the warning lights, but if the underlying issue is not addressed, the code is likely to reappear once the system detects the problem again.

10. How long does it typically take to repair OBDII code U250E in a Buick?

- The repair time for OBDII code U250E can vary depending on the complexity of the issue and the availability of parts, but it may take a few hours to a full day for a professional repair.