AutoCodes - Generic - U250B

U250B Code - Invalid Data Received From Active Safety Control Module 1 On Chassis Expansion CAN Bus

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3
Table of contents

|U250B code possible causes

  • Reprogram Active Safety Control Module 1
  • Faulty Active Safety Control Module 1
  • Active Safety Control Module 1 harness is open or shorted
  • Active Safety Control Module 1 circuit poor electrical connection

|How do I fix the U250B code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|Cost of diagnosing the U250B code

Labor: 1.0

The cost of diagnosing the U250B code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|What are U250B code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|U250B code description

Some devices are constantly receiving information from other devices through serial data communication network. The invalid data code will be set when a receiving device detects a discrepancy in the information it receives from another device causing its integrity to be questioned. The symptom byte listed in the Diagnostic Trouble Code (DTC) Descriptor is for engineering reference only. No external circuit diagnosis is involved. The DTC will set if the Active Safety Control Module 1 is not configured properly.
OBDII Code U250b - Invalid Data Received From Active Safety Control Module 1 On Chassis Expansion CAN Bus - AutoCodes.com

|Need more information with the U250B code?

Need more information on how to fix the U250B code?
Get Access to Factory Service Manuals

|U250B code information for specific makes

  • U250B BUICK Invalid Data Received From Active Safety Control Module 1 On Chassis Expansion CAN Bus
  • U250B CADILLAC Invalid Data Received From Active Safety Control Module 1 On Chassis Expansion CAN Bus
  • U250B CHEVROLET Invalid Data Received From Active Safety Control Module 1 On Chassis Expansion CAN Bus
  • U250B GMC Invalid Data Received From Active Safety Control Module 1 On Chassis Expansion CAN Bus

|Need help with a U250B code?

Get the U250b code diagnosed by a professional: Find a repair shop in your area

|U250B code comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the U250b code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧
Repair Importance Level: 3
 
1=Low 2=Medium 3=High What is this?
Repair Difficulty Level: 3
 
1=Easy 2=Moderate 3=Hard What is this?