AutoCodes - Generic - U2410

U2410 Code - Transmission Range Control Module Lost Communication With BCM On High Speed CAN Bus

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3
Table of contents

|U2410 code possible causes

  • Faulty Body Control Module (BCM)
  • Body Control Module harness is open or shorted
  • Body Control Module circuit poor electrical connection
  • Faulty Transmission Range Control Module

|How do I fix the U2410 code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|Cost of diagnosing the U2410 code

Labor: 1.0

The cost of diagnosing the U2410 code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|What are U2410 code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|U2410 code description

Devices connected to the serial data circuits monitor for serial data communications during normal vehicle operation. Operating information and commands are exchanged among the devices. The devices have prerecorded information about what messages are needed to be exchanged on the serial data circuits, for each virtual network. The messages are supervised and also, some periodic messages are used by the receiver device as an availability indication of the transmitter device. Each message contains the identification number of the transmitter device. The Diagnostic Trouble Code (DTC) will set a supervised periodic message that includes the transmitter device availability that has not been received.
OBDII Code U2410 - Transmission Range Control Module Lost Communication With BCM On High Speed CAN Bus - AutoCodes.com

|Need more information with the U2410 code?

Need more information on how to fix the U2410 code? Get Access to Factory Service Manuals

|U2410 code information for specific makes

  • U2410 BUICK Transmission Range Control Module Lost Communication With BCM On High Speed CAN Bus
  • U2410 CADILLAC Transmission Range Control Module Lost Communication With BCM On High Speed CAN Bus
  • U2410 CHEVROLET Transmission Range Control Module Lost Communication With BCM On High Speed CAN Bus
  • U2410 GMC Transmission Range Control Module Lost Communication With BCM On High Speed CAN Bus

|Need help with a U2410 code?

Get the U2410 code diagnosed by a professional: Find a repair shop in your area

|U2410 code comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the U2410 code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧
Repair Importance Level: 3
 
1=Low 2=Medium 3=High What is this?
Repair Difficulty Level: 3
 
1=Easy 2=Moderate 3=Hard What is this?