U240E Code - Transmission Range Selector Control Module Powertrain Sensor CAN Bus Off
Quick Answer
The powertrain high-speed General Motors Local Area Network (GMLAN)serial data circuits are serial data buses used to communicate information between the devices. Common causes include Faulty Transmission Range Selector Control Module, Transmission Range Selector Control Module harness is open or shorted, Transmission Range Selector Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U240E indicates Transmission Range Selector Control Module Powertrain Sensor CAN Bus Off.
- Common causes
- Common causes include Faulty Transmission Range Selector Control Module, Transmission Range Selector Control Module harness is open or shorted, Transmission Range Selector Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U240E Description
What are the Possible Causes of the DTC U240E?
- Faulty Transmission Range Selector Control Module
- Transmission Range Selector Control Module harness is open or shorted
- Transmission Range Selector Control Module circuit poor electrical connection
How to Fix the DTC U240E?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U240E code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U240E code?
Need more information on how to fix the U240E code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U240E code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- U240E Buick — Transmission Range Selector Control Module Powertrain Sensor CAN Bus Off
- U240E Cadillac — Transmission Range Selector Control Module Powertrain Sensor CAN Bus Off
- U240E Chevrolet — Transmission Range Selector Control Module Powertrain Sensor CAN Bus Off
- U240E GMC — Transmission Range Selector Control Module Powertrain Sensor CAN Bus Off
Frequently Asked Questions about U240E Code
1. What are the common symptoms of OBDII code U240E?
The common symptoms of OBDII code U240E include issues with shifting gears, transmission slipping, difficulty engaging gears, and the transmission getting stuck in one gear.
2. What causes OBDII code U240E to trigger?
OBDII code U240E is typically triggered when the Transmission Range Selector Control Module detects a fault with the Powertrain Sensor CAN Bus communication, indicating a loss of communication between the components.
3. How can I diagnose the cause of OBDII code U240E?
Diagnosing OBDII code U240E involves using a diagnostic scanner to retrieve the code, checking for any related codes, inspecting the wiring and connectors for damage or corrosion, and testing the Powertrain Sensor CAN Bus communication.
4. What are some repair tips for fixing OBDII code U240E?
Repair tips for fixing OBDII code U240E include checking and repairing any damaged wiring or connectors, ensuring proper ground connections, resetting the fault codes after repairs, and performing a relearn procedure if necessary.
5. Can I drive my vehicle with OBDII code U240E?
It is not recommended to drive your vehicle with OBDII code U240E present, as it can lead to further transmission problems and potential safety hazards. It is best to address the issue promptly.
6. How much does it typically cost to repair OBDII code U240E?
The cost to repair OBDII code U240E can vary depending on the underlying cause of the issue, the extent of the repairs needed, and labor rates in your area. It is advisable to consult a professional mechanic for an accurate estimate.
7. Are there any preventive measures to avoid OBDII code U240E in the future?
To prevent OBDII code U240E from occurring in the future, regular maintenance of the transmission system, including checking for leaks, ensuring proper fluid levels, and addressing any warning signs promptly, is essential.
8. Can a DIY enthusiast fix OBDII code U240E at home?
While some DIY enthusiasts may have the skills to diagnose and repair OBDII code U240E at home, it is recommended to seek professional help, especially when dealing with transmission-related issues, to ensure proper repairs and prevent further damage.
9. How urgent is it to address OBDII code U240E?
It is important to address OBDII code U240E promptly to prevent further damage to the transmission system and ensure the safe operation of your vehicle. Ignoring the issue can lead to more costly repairs down the line.
10. Is OBDII code U240E a common issue in certain vehicle makes and models?
OBDII code U240E can be more prevalent in certain vehicle makes and models, particularly those with transmission range selector control module and powertrain sensor CAN bus communication systems. It is advisable to check for any manufacturer recalls or technical service bulletins related to this code.
Discuss the causes and fixes for U240E OBDII Code
Code U240E comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
