AutoCodes.com | All About OBDII Engine Codes
AutoCodes - Mercury - U210C Mercury

U210C Mercury Code - Lost Communication Between Fuel Pump Control Module 'B' and Restraints Control Module

- Code Popularity: 1,336 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents
By AutoCodes.com - Updated Jun 15, 2020
Share on Facebook   Share on Twitter   Share on Linkedin

|Code U210C Mercury Possible Causes

  • Event Notification Signal (ENS) harness is open or shorted
  • Event Notification Signal (ENS) circuit poor electrical connection
  • Radio frequency interference or electromagnetic interference
  • Faulty Restraints Control Module (RCM) 2
  • Faulty Fuel Pump Control Module

|How do I Fix the Code U210C Mercury?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Does your Mercury have Safety Recalls? → Check here

|Code U210C Mercury Tech Notes

Check the harness for routing, alterations, incorrect shielding, or electrical interference from other systems. The Event Notification Signal (ENS) is used to notify the fuel pump control module 2 of an event requiring the fuel pump to be disabled. This signal is used instead of an Inertia Fuel Shutoff (IFS) switch. The fuel pump control module 2 monitors the ENS signal by sending a 12V low current signal on the ENS circuit to the Restraints Control Module (RCM).

|What is the Cost to Diagnose the Code U210C Mercury?

Labor: 1.0

The cost of diagnosing the U210C Mercury code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

|What are Code U210C Mercury Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|Code U210C Mercury Description

The Fuel Pump Control Module 2 monitors the duty cycle and frequency of the signal it receives from the Restraints Control Module (RCM). The fuel pump control module 2 determines if the signal on the Event Notification Signal (ENS) circuit from the RCM is a valid duty cycle and frequency. If the duty cycle or frequency is invalid, the fuel pump control module 2 sends a 40% duty cycle signal on the Fuel Pump Monitor 2 (FPM2) circuit to report the concern to the Powertrain Control Module (PCM). The test fails when the fuel pump control module 2 is still reporting that it is receiving an invalid duty cycle or frequency from the RCM after a calibrated amount of time.

OBDII Code U210C Mercury - Lost Communication Between Fuel Pump Control Module 'B' and Restraints Control Module - AutoCodes.com
U210C Mercury Code - Lost Communication Between Fuel Pump Control Module 'B' and Restraints Control Module

|Need More Information on the U210C Mercury Code?

Need more information on how to fix the U210C Mercury code? Get Access to Factory Service Manuals

|Need Help with the U210C Mercury Code?

Get the U210C Mercury code diagnosed by a professional: Find a repair shop in your area

|Code U210C Mercury comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the U210C Mercury code? Have you replaced any parts?
Any information is appreciated. Thanks