Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Check the harness for routing, alterations, incorrect shielding, or electrical interference from other systems. The Event Notification Signal (ENS) is used to notify the fuel pump control module 2 of an event requiring the fuel pump to be disabled. This signal is used instead of an Inertia Fuel Shutoff (IFS) switch. The fuel pump control module 2 monitors the ENS signal by sending a 12V low current signal on the ENS circuit to the Restraints Control Module (RCM).
The cost of diagnosing the U210C Ford code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
The Fuel Pump Control Module 2 monitors the duty cycle and frequency of the signal it receives from the Restraints Control Module (RCM). The fuel pump control module 2 determines if the signal on the Event Notification Signal (ENS) circuit from the RCM is a valid duty cycle and frequency. If the duty cycle or frequency is invalid, the fuel pump control module 2 sends a 40% duty cycle signal on the Fuel Pump Monitor 2 (FPM2) circuit to report the concern to the Powertrain Control Module (PCM). The test fails when the fuel pump control module 2 is still reporting that it is receiving an invalid duty cycle or frequency from the RCM after a calibrated amount of time.
Need more information on how to fix the U210C Ford code? Get Access to Factory Service Manuals
Get the U210C Ford code diagnosed by a professional: Find a repair shop in your area
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the U210C Ford code? Have you replaced any parts?
Any information is appreciated. Thanks