Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
There is a Factory Service Bulletin for the following Ford models: 2006-2008 Mercury Mariner Hybrid. The bulletin recommends cleaning the two ground for the ABS controller. The grounds are located on the right-hand side frame rail under the Hydraulic Control Unit (HCU).
The cost of diagnosing the U2062 Mercury code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
The operating voltage required to supply the ABS module, hydraulic pump, and isolation valves are between 10 and 17 volts. Ignition voltage and battery voltage are supplied to the Anti-Lock Brake System (ABS) Module. The Diagnostic Trouble Code (DTC) will set if no communication is detected with the Anti-Lock Brake System Module.
Need more information on how to fix the U2062 Mercury code? Get Access to Factory Service Manuals
Get the U2062 Mercury code diagnosed by a professional: Find a repair shop in your area
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the U2062 Mercury code? Have you replaced any parts?
Any information is appreciated. Thanks