U2014 MERCURY Code - Audio Control Module Hardware Component Failure
|U2014 MERCURY code possible causes
- Faulty Audio Control Module (ACM)
- Audio Control Module harness is open or shorted
- Audio Control Module circuit poor electrical connection
|How do I fix the U2014 MERCURY code?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|U2014 MERCURY code tech notesU2014:96 (Control Module Hardware: Component Internal Failure) The Diagnostic Trouble Code (DTC) sets when the ACM detects an internal fault to the built-in satellite radio receiver. This results in a complete loss of satellite radio functionality.
U2014:09 (Control Module Hardware: Component Failure) The DTC sets when the ACM detects a fault in the internal gyroscope. The gyroscope is not serviceable.
|Cost of diagnosing the U2014 MERCURY code
Labor: 1.0The cost of diagnosing the U2014 MERCURY code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are U2014 MERCURY code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|U2014 MERCURY code descriptionDigital signals are received by the satellite radio antenna and sent to the Audio Control Module (ACM) through the satellite radio antenna cable. The satellite receiver is internal to the ACM. When a satellite radio subscription is activated, the Electronic Serial Number (ESN) of the built-in satellite receiver is associated with the Vehicle Identification Number (VIN). As a result, the ACM cannot be swapped from one vehicle to another. If there is an open in the satellite radio antenna circuit, there is no satellite audio. The audio system display indicates a satellite antenna concern when the audio system is operated in satellite radio mode.
The primary source of vehicle location for the navigation system is the Audio Control Module (ACM) receiving the position signal through the Global Positioning System (GPS) antenna (integral to the satellite radio antenna). In addition, the ACM receives the navigation rolling wheel count signal from the Instrument Cluster (IC) (which gateways the signal from the ABS module). This secondary signal is used to calculate vehicle position when the GPS signal is lost. It also supports the adaptive learning function of the ACM, whereby the ACM can compensate for long-term differences between the GPS signal location and the actual distance traveled by the vehicle.
|Need more information with the U2014 MERCURY code?Need more information on how to fix the U2014 MERCURY code?
Get Access to Factory Service Manuals
|Need help with a U2014 MERCURY code?Get the U2014 Mercury code diagnosed by a professional: Find a repair shop in your area
|U2014 MERCURY code commentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the U2014 Mercury code? Have you replaced any parts?
Any information is appreciated. Thanks