U2010 MERCURY - Illumination Switch Circuit Short
U2010 MERCURY Possible Causes
- Faulty Illumination Switch
- Illumination Switch harness is open or shorted
- Illumination Switch circuit poor electrical connection
- Faulty Body Control Module (BCM)
How do I fix code U2010 MERCURY?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
How much do you know about cars?
Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge
U2010:15 Illumination Switch Circuit Short to Battery or Open
Cost of diagnosing the U2010 MERCURY code
Labor: 1.0The cost of diagnosing the U2010 MERCURY code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
U2010 MERCURY DescriptionThe Body Control Module (BCM) supplies voltage to all non-networked illumination sources through 1 of 3 circuits. Each circuit has separate Field-Effect Transistor (FET) protection that is used to disable the output driver for the circuit if a short to ground is detected. The Diagnostic Trouble Code (DTC) will set in continuous memory and on-demand when the BCM detects an excessive or a lower than expected current draw from a switch illumination circuit.
More InformationNeed more information on how to fix the U2010 MERCURY code?
Get Access to Factory Service Manuals
Need more help?Get the U2010 Mercury code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the U2010 Mercury code? Have you replaced any parts?
Any information is appreciated. Thanks