AutoCodes – Buick – U1875 Buick

U1875 Buick Code - Drive Motor Control Module 1 Lost Communication With Battery Energy Control Module

Quick Answer

Modules connected to the Controller Area Network (CAN) serial data circuits monitor for serial data communications during normal vehicle operation. Common causes include Faulty Battery Energy Control Module, Battery Energy Control Module harness is open or shorted, Battery Energy Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U1875 Buick indicates Drive Motor Control Module 1 Lost Communication With Battery Energy Control Module.
Common causes: Common causes include Faulty Battery Energy Control Module, Battery Energy Control Module harness is open or shorted, Battery Energy Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 473

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 08, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U1875 Buick Description

Modules connected to the Controller Area Network (CAN) serial data circuits monitor for serial data communications during normal vehicle operation. Operating information and commands are exchanged among the modules. The modules have prerecorded information about what messages are needed to be exchanged on the serial data circuits. The messages are supervised and also, some periodic messages are used by the receiver module as an availability indication of the transmitter module. Each message contains the identification number of the transmitter module. A module with a CAN serial data circuits malfunction or which loses power during the current ignition cycle will have a Loss of Communication Diagnostic Trouble Code (DTC) set by other modules that depend on information from that failed module. If any of the CAN circuit are shorted to battery voltage, ground, or between them no communication is possible on the CAN serial data bus, a Diagnostic Trouble Code will set.

OBDII Code U1875 Buick - Drive Motor Control Module 1 Lost Communication With Battery Energy Control Module - AutoCodes.com — U1875 Buick Code - Drive Motor Control Module 1 Lost Communication With Battery Energy Control Module

What does this mean?

What are the Possible Causes of the DTC U1875 Buick?

Faulty Battery Energy Control Module
Battery Energy Control Module harness is open or shorted
Battery Energy Control Module circuit poor electrical connection

How to Fix the DTC U1875 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U1875 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U1875 Buick code?

Need more information on how to fix the U1875 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U1875 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U1875 Buick Code

1. What are common symptoms of OBDII code U1875 in a Buick related to the Drive Motor Control Module 1 Lost Communication With Battery Energy Control Module?

- Common symptoms may include loss of power, hesitation during acceleration, and the illumination of the check engine light.

2. What are some possible causes of the U1875 OBDII code in a Buick?

- Possible causes include damaged wiring or connectors, a faulty battery energy control module, a malfunctioning drive motor control module, or a communication network issue.

3. How can I diagnose the U1875 code in my Buick?

- Diagnosing the U1875 code may involve checking the wiring and connectors for damage, testing the battery energy control module and drive motor control module, and using a scan tool to check for communication errors.

4. What are some repair tips for addressing the U1875 code in a Buick?

- Repair tips may include repairing or replacing damaged wiring or connectors, replacing the battery energy control module or drive motor control module if faulty, and ensuring all communication networks are functioning properly.

5. Can I drive my Buick with the U1875 code present?

- It is not recommended to drive your vehicle with the U1875 code present, as it may lead to performance issues and potential safety concerns. It is best to address the issue promptly.

6. How serious is the U1875 OBDII code in a Buick?

- The U1875 code can be serious as it can affect the performance and drivability of your vehicle. It is important to diagnose and repair the issue to prevent further damage.

7. How much does it typically cost to repair the U1875 code in a Buick?

- The cost of repairing the U1875 code can vary depending on the specific cause of the issue. Costs may include parts and labor for component replacement or repair.

8. Can I reset the U1875 code in my Buick without fixing the underlying issue?

- While you can clear the code with a scan tool, it is not recommended to do so without addressing the underlying problem. The code is likely to return if the issue is not fixed.

9. Is the U1875 code specific to Buick vehicles only?

- The U1875 code is specific to Buick vehicles and relates to the Drive Motor Control Module 1 Lost Communication With Battery Energy Control Module in those particular models.

10. How can I prevent the U1875 OBDII code from occurring in my Buick?

- To prevent the U1875 code, it is important to properly maintain your vehicle, check for any wiring issues regularly, and address any warning signs or symptoms promptly to prevent further complications.