U182A Buick Code - Hybrid Powertrain Control Module Lost Communication with Battery Energy Control Module on Powertrain Expansion CAN Bus Malfunction
Quick Answer
Devices connected to the powertrain high-speed General Motor Local Area Network (GMLAN) serial data circuits monitor for serial data communications during normal vehicle operation. Common causes include Faulty Starter/Generator Control Module, Starter/Generator Control Module harness is open or shorted, Starter/Generator Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U182A Buick indicates Hybrid Powertrain Control Module Lost Communication with Battery Energy Control Module on Powertrain Expansion CAN Bus Malfunction.
- Common causes
- Common causes include Faulty Starter/Generator Control Module, Starter/Generator Control Module harness is open or shorted, Starter/Generator Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U182A Buick Description
The Diagnostic Trouble Code (DTC) will be set when a supervised periodic message that includes the transmitter device availability has not been received.
What are the Possible Causes of the DTC U182A Buick?
- Faulty Starter/Generator Control Module
- Starter/Generator Control Module harness is open or shorted
- Starter/Generator Control Module circuit poor electrical connection
- Faulty Battery Energy Control Module
How to Fix the DTC U182A Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U182A Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U182A Buick code?
Need more information on how to fix the U182A Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U182A Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U182A Buick Code
1. What does the OBDII code U182A mean on a Buick?
The code U182A indicates that the Hybrid Powertrain Control Module has lost communication with the Battery Energy Control Module on the Powertrain Expansion CAN Bus due to a malfunction.
2. What are common symptoms of the U182A code?
Symptoms may include a check engine light, reduced power mode, poor hybrid system performance, or the inability of the vehicle to start.
3. What causes the U182A code to appear?
Common causes include a faulty Battery Energy Control Module, damaged or corroded wiring/connectors in the CAN bus system, software glitches, or issues with the Hybrid Powertrain Control Module.
4. Can I drive my Buick with the U182A code?
It is not recommended to drive with this code active, as it can lead to reduced power or potential failure of the hybrid system, which may compromise safety.
5. How do I fix the U182A code on my Buick?
Repairs may involve inspecting and repairing CAN bus wiring, replacing damaged connectors, reprogramming or updating control module software, or replacing the faulty Battery Energy Control Module.
6. How is the U182A code diagnosed?
A technician will use a scan tool to confirm the code, inspect the wiring and connectors for damage, and check for proper communication between the control modules.
7. Can a dead or weak hybrid battery cause the U182A code?
Yes, a weak or malfunctioning hybrid battery can disrupt communication with the Battery Energy Control Module, potentially triggering the U182A code.
8. Will clearing the code fix the U182A issue?
Clearing the code may temporarily turn off the warning light, but it will not resolve the underlying problem causing the communication error.
9. How much does it cost to repair the U182A code?
Repair costs vary depending on the issue but may range from $100 for simple wiring repairs to over $1,000 if a control module or hybrid battery needs replacement.
10. Can software updates resolve the U182A code?
In some cases, a software update for the Hybrid Powertrain Control Module or Battery Energy Control Module can fix communication errors and resolve the U182A code.
Discuss the causes and fixes for U182A Buick OBDII Code
Code U182A Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
