U182A 2018 GMC Sierra Code - Hybrid Powertrain Control Module Lost Communication with Battery Energy Control Module on Powertrain Expansion CAN Bus Malfunction
Quick Answer
Devices connected to the powertrain high-speed General Motor Local Area Network (GMLAN) serial data circuits monitor for serial data communications during normal vehicle operation. Common causes include Faulty Starter/Generator Control Module, Starter/Generator Control Module harness is open or shorted, Starter/Generator Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U182A 2018 GMC Sierra indicates Hybrid Powertrain Control Module Lost Communication with Battery Energy Control Module on Powertrain Expansion CAN Bus Malfunction.
- Common causes
- Common causes include Faulty Starter/Generator Control Module, Starter/Generator Control Module harness is open or shorted, Starter/Generator Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U182A 2018 GMC Sierra Description
The Diagnostic Trouble Code (DTC) will be set when a supervised periodic message that includes the transmitter device availability has not been received.
What are the Possible Causes of the DTC U182A 2018 GMC Sierra?
- Faulty Starter/Generator Control Module
- Starter/Generator Control Module harness is open or shorted
- Starter/Generator Control Module circuit poor electrical connection
- Faulty Battery Energy Control Module
How to Fix the DTC U182A 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U182A 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U182A 2018 GMC Sierra code?
Need more information on how to fix the U182A 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U182A 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U182A 2018 GMC Sierra Code
1. What are common symptoms of OBDII code U182A in a 2018 GMC Sierra Hybrid?
- Common symptoms include the hybrid powertrain malfunction indicator light coming on, reduced hybrid system performance, and potential issues with the vehicle's battery energy control.
2. What could cause the U182A code to appear in a 2018 GMC Sierra Hybrid?
- The U182A code typically indicates a communication problem between the hybrid powertrain control module and the battery energy control module, often caused by wiring issues, module failures, or CAN bus malfunctions.
3. How serious is the U182A code in a 2018 GMC Sierra Hybrid?
- The U182A code should be addressed promptly to prevent further damage to the hybrid powertrain system. Continued driving with this code present can lead to performance issues and potential safety concerns.
4. Can I still drive my 2018 GMC Sierra Hybrid with the U182A code present?
- It is not recommended to drive the vehicle with the U182A code present, as it can lead to reduced hybrid system performance and potential safety risks. It is best to have the issue diagnosed and repaired by a qualified technician.
5. How can I diagnose and repair the U182A code in my 2018 GMC Sierra Hybrid?
- Diagnosing the U182A code involves checking the wiring connections between the hybrid powertrain control module and the battery energy control module, as well as testing for any CAN bus communication faults. Repair may involve fixing wiring issues, replacing faulty modules, or reprogramming the control modules.
6. Is it possible to reset the U182A code in a 2018 GMC Sierra Hybrid?
- While clearing the code may temporarily turn off the malfunction indicator light, it is essential to address the underlying issue causing the code to prevent it from reoccurring.
7. How much does it cost to repair the U182A code in a 2018 GMC Sierra Hybrid?
- The cost of repairing the U182A code can vary depending on the specific issue causing the code, the labor rates of the repair shop, and the cost of any replacement parts needed. It is recommended to get a diagnostic and repair estimate from a qualified technician.
8. Can I prevent the U182A code from appearing in my 2018 GMC Sierra Hybrid?
- To prevent the U182A code, it is essential to perform regular maintenance on the hybrid powertrain system, including checking for loose or corroded wiring connections and ensuring the battery energy control module is functioning correctly.
9. Will the U182A code affect the overall performance of my 2018 GMC Sierra Hybrid?
- Yes, the U182A code can affect the overall performance of the vehicle's hybrid system, leading to reduced efficiency, power, and potential drivability issues. It is crucial to address the code promptly to maintain optimal performance.
10. Can I fix the U182A code in my 2018 GMC Sierra Hybrid myself?
- While some DIY enthusiasts may attempt to diagnose and repair the U182A code, it is recommended to seek assistance from a qualified technician or dealership familiar with hybrid powertrain systems to ensure proper diagnosis and repair.
Discuss the causes and fixes for U182A 2018 GMC Sierra OBDII Code
Code U182A 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
