AutoCodes – Buick – U1803 Buick

U1803 Buick Code - Lost Communication with Hybrid/EV Powertrain Control Module 2

Quick Answer

The serial data circuit is the means by which the devices in the vehicle communicate with each other. Common causes include Faulty Hybrid/EV Powertrain Control Module 2, Hybrid/EV Powertrain Control Module 2 harness is open or shorted, Hybrid/EV Powertrain Control Module 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U1803 Buick indicates Lost Communication with Hybrid/EV Powertrain Control Module 2.
Common causes: Common causes include Faulty Hybrid/EV Powertrain Control Module 2, Hybrid/EV Powertrain Control Module 2 harness is open or shorted, Hybrid/EV Powertrain Control Module 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 357

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 21, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U1803 Buick Description

The serial data circuit is the means by which the devices in the vehicle communicate with each other. Once the scan tool is connected to the serial data circuit through the Data Link Connector (DLC), the scan tool can be used to monitor each device for diagnostic purposes and to check for Diagnostic Trouble Codes (DTC). When the vehicle is ON, each device communicating on the serial data circuit sends a state of health message to ensure that the device is operating properly. When a device stops communicating on the serial data circuit, for example, if the device loses power or ground, the state of health message it normally sends on the serial data circuit disappears. Other devices on the serial data circuit, which expect to receive that state of health message, detect its absence; those devices in turn set a DTC associated with the loss of state of health of the non-communicating device. A loss of serial data communications DTC does not represent a failure of the devices that contain the stored DTC.

OBDII Code U1803 Buick - Lost Communication with Hybrid/EV Powertrain Control Module 2 - AutoCodes.com — U1803 Buick Code - Lost Communication with Hybrid/EV Powertrain Control Module 2

What does this mean?

What are the Possible Causes of the DTC U1803 Buick?

Faulty Hybrid/EV Powertrain Control Module 2
Hybrid/EV Powertrain Control Module 2 harness is open or shorted
Hybrid/EV Powertrain Control Module 2 circuit poor electrical connection

How to Fix the DTC U1803 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U1803 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U1803 Buick code?

Need more information on how to fix the U1803 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U1803 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U1803 Buick Code

1. What does the OBDII code U1803 mean for a Buick?

The U1803 code indicates a lost communication issue with the Hybrid/EV Powertrain Control Module 2, typically due to a wiring, module, or network communication fault.

2. What are the common symptoms of the U1803 code on a Buick?

Symptoms may include a check engine light, reduced power mode, poor fuel efficiency, or issues with hybrid/EV system performance.

3. What causes the U1803 code on a Buick?

Common causes include damaged or corroded wiring, a faulty Hybrid/EV Powertrain Control Module 2, or a communication issue in the controller area network (CAN) bus.

4. Can I drive my Buick with the U1803 code?

Driving is possible but not recommended, as the vehicle may experience reduced performance, limited hybrid/EV functionality, or potential safety concerns.

5. How do I diagnose the U1803 code on my Buick?

Diagnosis involves inspecting the wiring and connectors for damage, checking for proper voltage at the Hybrid/EV Powertrain Control Module 2, and testing the CAN bus communication.

6. How do I fix the U1803 code on a Buick?

Repairs may include replacing damaged wiring, cleaning or reconnecting corroded connectors, updating module software, or replacing the faulty Hybrid/EV Powertrain Control Module 2.

7. Is the U1803 code specific to hybrid or electric Buicks?

Yes, the U1803 code is specific to hybrid or electric vehicles as it relates to the Hybrid/EV Powertrain Control Module 2.

8. How much does it cost to repair the U1803 code on a Buick?

Repair costs vary but typically range from $100 to $1,000 depending on whether wiring repairs, module replacement, or software updates are needed.

9. Can a software update fix the U1803 code on a Buick?

In some cases, a software update for the Hybrid/EV Powertrain Control Module 2 may resolve the issue if communication errors are caused by outdated programming.

10. Do I need a professional mechanic to fix the U1803 code?

While some basic checks can be done at home, diagnosing and repairing network communication or module issues typically requires a professional with specialized tools.