Review the 'Possible Causes' mentioned above and visually examine the corresponding wiring harness and connectors. Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
To diagnose the U1601 Fiat code, it typically requires 1.0 hour of labor. The specific diagnosis time and labor rates at auto repair shops can differ based on factors such as the location, make and model of the vehicle, and even the engine type. It is common for most auto repair shops to charge between $75 and $150 per hour.
When powered, during flash programming of the Occupant Restraint Controller (ORC) experienced an interruption of the programming procedure due to a software or hardware failure. The repair of this fault centers on verifying the ORC completed successfully the flash programming process completely. The flash programming process is asked to run again in the diagnostics written to possibly clear the internal hardware or software failure.
This Diagnostic Trouble Code (DTC) sets when the ORC detects a failure of the flash programming process in the bootloader mode not allowing the ORC module to enter the application mode. This DTC will not set as a Stored Code.
Need more information on how to fix the U1601 Fiat code? Get Access to Factory Service Manuals
Get the U1601 Fiat code diagnosed by a professional: Find a repair shop in your area
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the U1601 Fiat code? Have you replaced any parts?
Any information is appreciated. Thanks